Question 1

I'm having trouble logging in

Accepted Answer

Sorry about that. Please make sure you’ve [created your account] and then [activate your account] to log in to the new site. You should have gotten an email from us to activate the account.

Need to resend the email? Click here: [Link to resend email]

Question 2

Betaflight Presets (Recovery)

Accepted Answer

This guide walks you through the process of updating your iFlight BNF drone's Betaflight firmware. Follow these steps carefully to ensure smooth operation and avoid issues during the update process.

1. Determine if an Update is Necessary

Evaluate if an Update is Required: In most cases, iFlight BNFs come with stable, tested firmware from the factory. If your drone is flying well, you might not need to update the firmware.
Understand the Risks: Updating firmware can introduce new bugs or incompatibilities. Always consider whether new features or bug fixes are worth the potential risk. If in doubt, research the latest firmware's release notes and reviews from users with similar setups.
Backup Your Current Setup: If you decide to update, always back up your current configuration. This allows you to return to your previous settings if needed. More on how to back up is provided below.

2. Preparations for Firmware Update

Install Betaflight Configurator:
- Download the latest version of the Betaflight Configurator from the Betaflight GitHub Releases page.
- Choose the appropriate version for your operating system (Windows, Mac, or Linux), and install the program following the instructions.
Connect the Drone to Your Computer:
- Use a USB cable to connect your iFlight BNF to your computer.
- Ensure that the correct USB drivers are installed. Windows users may encounter driver issues, which can be resolved using tools such as the ImpulseRC Driver Fixer to automatically install the necessary drivers for ARM chips like F4**, F7** or H7** flight controllers.
- If you own a bind-and-fly (BNF) drone with an ATF flight controller (for example ATF435) you'll need to install the Artery chip drivers manually. This can be done trough a Google search to find related tutorials or you can also checkout our Helpdesk section 'Troubleshooting'.
Backup Your Current Configuration:
- In Betaflight Configurator, navigate to the Presets Tab.
- Click "Save Backup" to save your current confiiguration.
- Make sure the file just created is not empty.

3. Choosing the Correct Firmware

Identify Your Flight Controller:
- Check your drone’s flight controller model to ensure you choose the correct firmware. You can find this information by connecting your drone to the Betaflight Configurator and checking the top left section or looking at the flight controller documentation.
Selecting the Firmware:
- In Betaflight Configurator, go to the Firmware Flasher Tab.
- Select your flight controller target from the dropdown menu. For example, an iFlight controller might use a target like "IFRC_F7" or similar. You can also use the button "AUTO" to assign the correct firmware selection to your currently installed firmware.
- Choose the latest stable firmware version unless you have specific needs for a different version.
Enable Full Chip Erase:
- Ensure that you check the "Full Chip Erase" option before flashing the firmware. This clears old data, preventing conflicts between old and new firmware.

4. Flashing the Firmware

Enter Bootloader Mode:
- Most flight controllers will enter bootloader (DFU) mode automatically when connected to Betaflight Configurator after you click the "Flash Firmware" button.
- If DFU mode is not entered automatically, press and hold the boot button on your flight controller while connecting the USB cable to force it into bootloader mode.
- Betaflight Configurator should detect this as DFU mode, indicated in the lower right corner of the screen.
- If DFU mode is still not active, this may need to be be resolved by installing the correct drivers using tools such as the ImpulseRC Driver Fixer.
Select your Radio Protocol:
- Betaflight version 4.4.1 and newer will only allow one protocol to be installed. Select "CRSF" for ExpressLRS (ELRS) or TBS Crossfire receivers. Select "SBUS" for DJI FPV RC users.
Load Firmware:
- Click on "Load Firmware [Online]." This downloads the selected firmware from the Betaflight server.
Flash the Firmware:
- After the firmware is loaded, click "Flash Firmware" to begin the update. Ensure that the process is not interrupted. Once completed, the flight controller will automatically reboot with the new firmware installed.

5. Adding iFlight Factory Recovery Presets (Recommended)

If you wish to recover the factory-tuned iFlight settings for your drone, you can use the iFlight Factory Preset Library. Follow the steps below:

Access the Presets Tab:
- In Betaflight Configurator, navigate to the Presets Tab.
Add iFlight Factory Recovery Source:
- Click on the "Add New Source" button.
- Copy and paste the following text exactly as it appears (without any backspace or empty space at the beginning or end of each line):
  - iFlight Factory Recovery
  - https://github.com/XING-IF/firmware-presets/
  - iFlight-factory-recovery
- Set the new preset source to "Active".
Select the Correct Preset:
- After adding the iFlight source, you will see a list of presets specifically tuned for iFlight drones in the category BNF. Select the appropriate preset for your drone model.
- Every preset has a firmware version that has to match the currently installed firmware on your flight controller.
- Read the preset text carefully and follow the steps to apply!
- Click "Save and Reboot".

7. Testing Your Drone After Update

Initial Test Flight:
- After flashing the firmware and restoring your configuration, perform a test flight in a safe environment.
- Start with basic hovering and light maneuvers to ensure stability. Check for any issues, such as motor desyncs, poor flight performance, or abnormal behavior.
Tuning and Adjustments:
- If any issues arise, revisit Betaflight Configurator and fine-tune settings, such as PID tuning, filters, or rates, to match your flight style.

Other iFlight BNF models:

If you have an unlisted or older iFlight Bind-And-Fly drone model then you might not find a current Betaflight factory preset on our Github database. Please use the following Google Drive Database to download your factory dump file: https://drive.google.com/drive/folders/1jQlSfYY74gaQku_EMYRsBpU7gqcCcCZK

Optional: Restoring and Configuring Your Drone

Restore Configuration:
- You can restore your previous settings by returning to the Presets Tab and click "Load Backup" to restore your settings. Use the file that was created with "Save Backup" to load and apply. Make sure that the firmware version from the backup matches your currently installed firmware, otherwise you'll receive errors.
Check Basic Settings:
- Check your drone's basic settings, such as arming modes, PID values, motor protocols, and any custom configurations like Betaflight OSD.
Calibrate the Accelerometer:
- If your flight controller includes an accelerometer, go to the Setup Tab in Betaflight and click "Calibrate Accelerometer." Ensure your drone is on a level surface while performing this step.
Check ESCs and Motors:
- Confirm that your ESC (Electronic Speed Controller) protocol (such as DShot or Multishot) is correct under the Motor Tab. Perform an ESC calibration if necessary to ensure smooth motor performance.

Question 3

FPV drone doesn't arm

Accepted Answer

If your quadcopter is not arming, follow this detailed guide to troubleshoot and resolve the problem.

Step 1: Check the Battery

Before troubleshooting further, always ensure that:

The battery is fully charged.
The battery is properly connected to the quadcopter.

A low or improperly connected battery can prevent your quadcopter from arming due to insufficient power. To check:

Use a voltage checker or monitor the battery voltage in Betaflight Configurator (or similar software).

Step 2: Transmitter and Receiver Binding

Ensure that your transmitter (remote control) and receiver are properly bound and communicating with each other. If they are not, your quad will not arm.

To check if they are bound:

Verify that your transmitter displays the correct model.
Look for any indicator lights on the receiver showing it is receiving a signal.
Test other transmitter functions like moving the throttle or pitch, and confirm that the receiver reacts.

If they are not bound:

Follow the binding instructions specific to your transmitter and receiver model. This usually involves holding a button on the receiver and binding via the transmitter menu.

Step 3: Throttle Position Check

The most common reason for arming issues is the throttle stick not being at the lowest position. Quadcopter flight controllers have built-in safety features that prevent arming if the throttle is too high.

Steps to Check:

Move the throttle stick to the lowest possible position.
Ensure that the transmitter endpoints are correctly calibrated (you’ll do this in a later step if necessary).
Some transmitters allow you to set the Throttle Trim; ensure this is also set to the lowest value.

Step 4: Check Flight Mode Selection

Make sure you are in an appropriate flight mode that allows arming. Some flight controllers are configured not to arm in certain modes.

Flight Mode Verification:

Angle Mode is the safest and most common flight mode for beginners, allowing for automatic leveling.
Ensure that you’re not trying to arm the quadcopter in a mode like Horizon Mode or Acro Mode, unless you are confident those modes have been correctly configured.

Tip: Verify which flight mode is selected in your transmitter or Betaflight Configurator.

Step 5: Pre-Arming Safety Features (Arming Flags)

Your flight controller has safety checks that must be met before it allows arming. These are called arming flags, and they can prevent arming for various reasons.

To check arming flags in Betaflight:

Connect your quadcopter to the Betaflight Configurator via USB.
Go to the Setup tab and look for an “Arming Disabled” message. This message will indicate what is stopping the arming process.

Common arming flags include:

Throttle too high: Throttle stick must be at its lowest position.
Accelerometer calibration needed: You need to calibrate the accelerometer (next step).
Bad receiver signal: Check your receiver is working and bound to the transmitter.
Failsafe enabled: The quad detects a signal loss, preventing arming (more on this below).

Step 6: Calibrate the Accelerometer

If the accelerometer is out of calibration, your quadcopter may not arm. This is a common issue, especially if you’ve made changes to the flight controller or had a crash.

Steps to calibrate in Betaflight:

Connect the quadcopter to Betaflight Configurator.
Go to the Setup tab.
Place the quadcopter on a flat surface.
Click “Calibrate Accelerometer”. The flight controller will now align itself to the level surface.

Tip: Always ensure that the quadcopter is stable and flat during calibration to avoid drift during flight.

Step 7: Failsafe Settings

Failsafe settings prevent the quad from arming if it detects that the receiver is not functioning properly or if signal strength is too low.

To check for failsafe issues:

Ensure that your receiver is correctly bound and that the failsafe settings in Betaflight are configured.
In Betaflight Configurator, go to the Failsafe taband review the settings.
- By default, the failsafe should trigger if signal loss occurs.
- Ensure that “Stage 1” is set to Land or Drop (depending on your preference) rather than Disarm, which would prevent arming entirely.

Step 8: Check for GPS Lock (if applicable)

If your quadcopter is equipped with GPS, arming might be prevented until a sufficient number of satellites are locked.

How to check GPS lock:

Ensure you are outside in an open area.
Wait for your quadcopter to lock onto at least 5-6 satellites.
You can check the number of satellites in Betaflight Configurator or on the OSD (On-Screen Display) if it’s configured.

Step 9: Verify Motor Stop Functionality

The Motor Stop feature might make it seem like the quadcopter isn’t arming, even though it actually is. This setting prevents motors from spinning immediately after arming.

To check Motor Stop settings:

Connect to Betaflight Configurator.
Go to the Configuration tab.
Look for the “Motor Stop”option.
- If this option is checked, the motors will not spin upon arming.
- Uncheck it if you want the motors to spin when the quad is armed.

Step 10: Check Transmitter Endpoints

Your transmitter’s channel endpoints must match what the flight controller expects. Incorrect endpoints can prevent arming due to invalid input values.

Steps to check and calibrate endpoints:

Go to the Receiver tab in Betaflight Configurator.
Move the throttle, yaw, pitch, and roll sticks to their maximum and minimum positions.
Ensure that all channels go from 1000 to 2000 (or close to these values).
If they don’t, you’ll need to adjust the subtrim and endpoints on your transmitter until the values align.

Step 11: Inspect ESCs and Motors

Hardware issues like faulty Electronic Speed Controllers (ESCs) or motors can also prevent arming.

Steps to check:

Inspect the wiring to ensure all ESCs are connected properly to the flight controller.
Check for any damage or loose connections.
If necessary, recalibrate the ESCsusing Betaflight Configurator:
- Go to the Motors tab.
- Follow the ESC calibration steps (with props removed for safety).

Step 12: Update Flight Controller Firmware

Sometimes, bugs or outdated firmware can cause arming issues.

Steps to update the firmware:

Connect your quadcopter to Betaflight Configurator.
Go to the Firmware Flasher tab.
Download and flash the latest firmware version for your flight controller model.
Follow the instructions carefully to avoid bricking the controller.

Step 13: Review the Flight Controller's Manual

If none of the above steps work, refer to your flight controller’s user manual for model-specific instructions or troubleshooting tips. Some flight controllers have unique settings that might block arming under certain conditions.

Step 14: Common Arming Error Messages and Their Solutions

Here’s a quick overview of common error messages and how to fix them:

Throttle Too High: Ensure the throttle is fully down and recalibrate endpoints if necessary.
Failsafe: Ensure receiver is bound and failsafe settings are properly configured.
No GPS Lock: Wait for sufficient satellite lock if using GPS.

Step 15: Contact Our Support Team

If none of the above steps resolve the issue, please reach out to our support team for further assistance. Be sure to provide:

Your flight controller model.
Your transmitter model.
Any error messages you see in Betaflight Configurator.

Our team will help you diagnose and resolve the issue as quickly as possible.

Question 4

QuickStart Guide

Accepted Answer

Congratulations, you have just purchased your first iFlight BNF. We wish you save flights and a great time with your quadcopter.

We have some short steps to follow:

Step 1: Don't put your propellers on!

Leave the spin direction markers on the motors. We will need those for the last step putting on the propellers.

Step 2: Bind the receiver installed in your BNF to your transmitter.

Most quads can power the receiver through the USB cords. If you don't see the receiver LED come up, try again with a battery to confirm a.) if its powered on and b.) its position. The flight controller (FC) sits always around the center, the receiver (TBS Crossfire or ELRS) is about as big as your thumb and sits in the front or back, top or bottom mounted.

ATTENTION: Never plug in a battery if there is no antenna installed on your quad. This can possibly damage your video transmitter but also leads to overheating. Always keep the battery plugged in as short as possible if no cooling applied to the drone.

DJI FPV Radio Controller (RC2, RC3) do not have a separate receiver. The DJI video transmitter has an inbuilt receiver which connects to Goggle and Radio Controller. This can only be powered on by plugging in the battery.

If you don't know how to bind your receiver to your radio transmitter, please don't skip Step 3.
Skip Step 3 if you've already linked everything together.

Step 3: Follow Up with our Binding Guides

We have separated Setup Guides for ELRS, TBS Crossfire or DJI Radio Controllers. You'll know what you need to select.

Please come back after binding your receiver to your radio transmitter.

Step 4: Download and install the Betaflight Configurator

Step 5: Connect your computer to your drone with an USB cable.

Step 6: Download ImpulseRC driver fixer if you're on a windows computer.

Open the file while being connected to your drone. The tool will automatically detect the flight controller and install the windows drivers for Betaflight.

Step 7: Open the Betaflight Configurator.

We have to do some simple steps to doublecheck your equipment. Every iFlight BNF comes with a factory setup that contains a lot of settings to configure the flight controller, but also so called tune and filter setups that make your drone fly well.

Sidenote:

You don't need to change anything, you also don't need to update anything. If you plan to update, there is a separate advanced Guide which we don't need now. Updates should only be performed by advanced users with experience. Never try an update before doing some flights on the factory setup first.

Step 8: Quick Check:

On the first screen, you can see the drones' orientation, nothing to check here. Click on the 'Receiver' tab and confirm that your radio transmitter is correctly sending inputs. Plug in your battery to hear your drone bootup the first time. Try if the throttle stick is moving the throttle indicator.

Click on 'Modes' tab to setup your arming button. The standard for most people would be AUX1, and this is also recommended due to some technical aspects of the software. For DJI Radio Controllers please use any button you like to arm. To assign a AUX channel just click on the Dropdown in the Arm field and select AUTO, then move the button you want to link.

Angle Mode is activated by default across the entire selection range of channel AUX2. If you don't want to use this leveling mode just smaller the selection range and assign AUX2 to a button on your radio controller to activate or deactivate this function at any time.

Step 9: First Flight

Question 5

What is your cancellation policy?

Accepted Answer

Orders can be canceled within [X hours].

Please email our team with your cancellation request as soon as possible.

You will receive confirmation of your cancellation if we’re able to make it happen.

After this period, we may not be able to cancel your order as it might already be in processing or shipment.

If you have already received an order confirmation email, it may be impossible to cancel your order. However, you can always request a return or exchange once your order arrives.

Question 6

Setting up DJI Goggles to O3 Air Unit

Accepted Answer

Unboxing & Charging: Unbox both devices and ensure they are fully charged.
Install DJI Assistant 2 & Activate:
- Install DJI Assistant 2 (FPV Series).
- Connect the O3 Air Unit and Goggles via USB-C to activate them.
Update Firmware: Ensure both devices are updated to the latest firmware.
Pairing: Press the pair button on both the Air Unit and Goggles.
Betaflight OSD: Configure the OSD via Betaflight for flight data display.
Optimize Goggles Settings: Adjust resolution, frame rate, FOV, and bitrate.
Final Testing: Power on, test video feed, and adjust settings as needed.

For more detailed instructions, refer to DJI's guide here.

Question 7

Setting up GPS Rescue

Accepted Answer

This guide will help you set up GPS Rescue Mode in Betaflight to ensure your drone can return to a designated home position in case of signal loss. This feature is especially useful in long-range flying scenarios. Follow the steps carefully to configure GPS Rescue on your quadcopter.

1. Prerequisites

Before getting started, ensure the following:

Your quadcopter is equipped with a GPS module compatible with Betaflight (such as BN-180 or BN-220).
You are running Betaflight version 4.1 or later. Older versions may not have full GPS Rescue functionality.
If you're using a M10 GPS module it's recommended to upgrade Betaflight to Version 4.5 or newer.

2. Hardware Setup: Installing the GPS Module

Mount the GPS module on your quadcopter in an open area, away from interference like your VTX (video transmitter) or antennas. It’s usually placed at the rear of the quad to get a clear satellite signal.
Wire the GPS moduleto your flight controller (FC). Use a UART port (TX and RX pads) on your flight controller.
- GPS TX → FC RX
- GPS RX → FC TX
- Power the GPS by connecting it to a 5V and GND pad.
Double-check the wiring connections before moving on to configuration.

3. Configuring the UART Port for GPS in Betaflight

Connect your flight controller to your computer and open Betaflight Configurator.
Navigate to the Ports tab.
Find the UART port where you connected the GPS module.
- In the “Peripherals” column of that UART, select GPS from the dropdown menu.
Click Save and Reboot to apply the changes.

4. Configuring GPS Settings in Betaflight

Once the FC has rebooted, go to the Configuration tab.
Scroll down to the GPS section.
Toggle ON the GPS option.
Set the correct GPS protocol:
- Most GPS modules use the UBLOX protocol, so select this unless your GPS specifies something different.
If your GPS module includes a magnetometer (compass), enable it by toggling Magnetometer (optional).
Click Save and Reboot.

5. Calibrating and Testing the GPS

Wait for GPS lock:
- It may take a few minutes for your GPS module to get its first lock on satellites (especially in a new location).
- You’ll need a minimum of 6 satellites to fly safely. For better accuracy and performance, aim for more than 8 satellites.
Go to the Betaflight OSD or use the GPS tab in the configurator to check the number of satellites, GPS coordinates, and other information. Ensure everything is functioning correctly before proceeding.

6. Setting Up GPS Rescue Mode in Failsafe

In Betaflight Configurator, go to the Failsafe tab.
Under Stage 2 Failsafe Procedure, select GPS Rescuefrom the dropdown menu.
- This means that when your drone loses connection with the transmitter, GPS Rescue will automatically trigger and return the quad to the home position (where it last acquired a GPS lock before takeoff).
Fine-tune GPS Rescue parameters:
- Minimum Satellites for Fix: Set this to at least 6 to ensure GPS Rescue only activates when there’s a solid GPS lock.
- Initial Climb Height: Set this to around 100m (or higher) to ensure the quad climbs to a safe altitude before heading home.
- Descent Speed: Set this to a reasonable value (e.g., 50 cm/s) for a controlled descent.
- Max Home Distance: This limits the maximum distance for GPS Rescue to engage. If your quad is beyond this distance, Rescue won’t activate.
Click Save and Reboot.

7. Optional: Assigning a Manual GPS Rescue Switch

You can manually activate GPS Rescue Mode by assigning it to a switch on your transmitter.

Go to the Modes tab in Betaflight Configurator.
Look for GPS Rescue and assign it to an AUX channel that corresponds to a switch on your transmitter.
Adjust the range so that when you flip the switch, the GPS Rescue Mode is triggered.
Click Save.

8. Testing GPS Rescue Mode

Before flying with GPS Rescue, it is crucial to test it in a controlled environment.

Check home position: Before arming your quad, ensure that you have a proper GPS lock and that the home position (where the quad took off) is recorded. You can monitor this in the Betaflight OSD or via the Configurator.
Test GPS Rescue in manual mode:
- Fly your quad in a safe, open area with a good GPS signal.
- At a safe altitude, activate the GPS Rescue switch (if set up) or simulate failsafe conditions (e.g., by turning off your transmitter momentarily).
- Watch to see if the quad gains altitude, turns towards the home point, and begins to return.
Check the failsafe behavior:
- After GPS Rescue is triggered, verify that your quadcopter climbs to the specified altitude, returns to the home position, and begins descending.
- Once the quad gets close to the home point, you can regain control by reactivating your transmitter or disarming the quad manually.
Testing failsafe:
- Set up a soft failsafe to see if the GPS Rescue activates when the transmitter loses signal.

9. Troubleshooting Tips

Not getting GPS lock? Check the wiring of your GPS module and make sure it's placed away from interference. Re-check if the correct protocol (UBLOX) is selected in Betaflight.
GPS Rescue not climbing high enough? Double-check the settings in the Failsafe tab, especially the Initial Climb Height.
GPS Rescue drifting? Ensure that you have a solid GPS lock before takeoff (at least 6 satellites). More satellites will provide more accurate positioning.
Quad doesn’t return to home point? Check the Home Distance setting and make sure that the home point is being set correctly before arming.

Final Notes

Always test GPS Rescue Mode in a controlled environment before relying on it in critical situations.
GPS Rescue is not foolproof and can be affected by the environment, poor GPS signal, or incorrect configuration. Use it as a last resort for failsafe, and always fly responsibly.

Question 8

Can't connect to Betaflight

Accepted Answer

If you’re having trouble connecting your flight controller to Betaflight, the issue is often related to missing or incorrect drivers. Follow these steps to resolve the issue, depending on your chip version.

Step 1: Identify Your Chip (AT32 or STM32)

AT32 (Artery Chip):

These flight controllers are becoming popular due to their affordability. However, they require manual driver installation, as the ImpulseRC Driver Fixer doesn't support AT32. The flight controller name contains ATF.

STM32:

This chip is the most common and usually works well with the ImpulseRC Driver Fixer. The flight controller name contains F4, F7 or H7.

Step 2: Resolving STM32 Driver Issues (Automatic Fix)

If your STM32-based controller isn't detected in Betaflight, follow these steps:

Download the ImpulseRC Driver Fixer:
- Download the tool from here.
- Run the tool while your controller is connected to your computer.
- The tool will automatically attempt to fix any driver issues related to STM32 flight controllers.
Ensure You Have the Correct COM Port Drivers:
- STM32 flight controllers typically require virtual COM port drivers, which are usually installed by default. If not, they can be downloaded from the STM website.

Step 3: Resolving AT32 Driver Issues (Manual Fix)

For AT32 controllers, drivers must be installed manually. Follow these steps to ensure proper installation:

Download the AT32 Virtual COM Port Driver:
- Go to the Artery AT32F435 MCU page.
- Download and install the Virtual COM Port Driver to enable communication between your PC and the flight controller.
- Restart your computer after installation.
Install DFU Drivers for Firmware Flashing:
- To enable DFU mode (Device Firmware Update) for flashing firmware, download the Artery ISP Programmer from the same page.
- Install the software and restart your computer.
Check Device Manager:
- After installing the drivers, connect your AT32 controller and open Device Manager (Windows key + X > Device Manager).
- You should see the controller listed under Ports (COM & LPT) or Universal Serial Bus Devices.
Test in Betaflight:
- Open Betaflight and try connecting your flight controller. It should now be recognized if the drivers are correctly installed.

Step 4: Additional Troubleshooting

Try a Different USB Cable: Sometimes connection issues are related to faulty cables, especially if they’re charge-only.
Reinstall Betaflight: If driver issues persist, reinstalling Betaflight can also resolve connection problems.

Useful Links

ImpulseRC Driver Fixer: Download here
Artery AT32F435 MCU Drivers: Download here

Question 9

What is your shipping policy?

Accepted Answer

Enhancing Your Shipping Experience

We are committed to continuously improving our shipping services through better contracts and faster delivery times. We anticipate offering even more competitive rates in the near future.

Efficient Order Processing

Orders are carefully packed and dispatched on the same or next working day, with courier pickups scheduled from Monday to Friday.

Rapid Delivery Across Europe

We already provide 24-48 hour delivery to most countries. To explore our latest shipping options, please review the available methods at checkout.

Enjoy Free Shipping on Eligible Orders

- Free Shipping on orders over 100€, 250€ or €500 (for most European countries).
- Austrian Neighbors: Free shipping on orders over 100€ and €250 (*excluding Switzerland).
- Domestic Shipping in Austria: Free on orders over €100.

Available Carriers:

Post AT, DHL, DPD, GLS, UPS (DHL Express available upon request).

Battery shipments:

Batteries above 4500mAh or >100Wh cannot be shipped with Express!

---

Question 10

Setting up ExpressLRS / ELRS

Accepted Answer

Step 1: Power On the Receiver

When powering on an ExpressLRS receiver for the first time, it typically enters bind mode automatically if it has not been paired before. This is indicated by a double-blinking LED. iFlight BNFs with ELRS receivers have been paired before at the factory for quality control inspection.

Step 2: Binding / Linking of your radio controller and FPV drone receiver

There are several ways to bind your ELRS receiver to your transmitter, but we recommend using the binding phrase method. By flashing both the receiver and transmitter with the latest firmware, you can set a binding phrase—often referred to as an 'ELRS password'—for your equipment. This approach makes it easy to add new FPV drones or receivers to your setup. All you need to do is flash each new receiver with the same binding phrase, and it will seamlessly integrate into your fleet.

Method 1: Set the Binding Phrase (Recommended)

ExpressLRS offers a feature called the binding phrase, which simplifies the binding process. You can set this phrase during the firmware flashing process for both the transmitter and receiver. Once configured, the devices will automatically bind when powered on. Ensure that the same binding phrase is used for both the receiver and transmitter to allow automatic binding.

Alternatively, if your receiver has WiFi capabilities, you can connect to it via its onboard WiFi. Once powered on, the receiver will broadcast a WiFi signal. Connect to this network, access the web interface, and adjust settings like the binding phrase.

Method 2: Use the Receiver’s Bind Button

Only for ELRS firmware 3.4.1 or newer! Some receivers have a physical bind button. Press and hold this button for 2-3 seconds to activate bind mode. The LED will blink, signaling that the receiver is ready to connect to a transmitter. If your receiver doesn’t have a bind button, proceed to the power-cycling method in the next step.

Method 3: Three-Power-Cycle Method

For receivers that don’t enter bind mode automatically or lack a bind button, use the 3-power-cycle method. Power the receiver on and off three times in quick succession. After the third cycle, the LED will begin blinking rapidly, indicating that it’s now in bind mode.

To finish method 2 or 3: Initiate Binding from the Transmitter

With the receiver in bind mode, you can now initiate binding from your transmitter. If you’ve set a binding phrase, the transmitter should automatically connect to the receiver. Without the binding phrase, you must manually trigger the binding process on your transmitter, for instance, by using the ExpressLRS Lua script on OpenTX/EdgeTX radios.

Steps to bind manually:

Access the transmitter settings on your radio.
Select the “Bind” option to initiate the binding process.
The transmitter will now search for the receiver and establish the connection.

Final: Confirm Successful Binding

Once binding is successful, the LED on the receiver will stop blinking and remain solid. This indicates that the receiver is now connected to the transmitter and ready for use.

Optional Troubleshooting

If binding is unsuccessful:

Verify that the firmware on both the transmitter and receiver is updated and compatible.
Ensure both devices are using the same binding phrase.
Retry the 3-power-cycle method to re-enter bind mode.

Question 11

Bad signal range with my DJI Video System

Accepted Answer

Troubleshooting Signal Range Issues with DJI Video Systems

Q: I'm having trouble logging in

Sorry about that. Please make sure you’ve [created your account] and then [activate your account] to log in to the new site. You should have gotten an email from us to activate the account. Need to resend the email? Click here: [Link to resend email]

Q: What is your cancellation policy?

Orders can be canceled within [X hours] . Please email our team with your cancellation request as soon as possible. You will receive confirmation of your cancellation if we’re able to make it happen. After this period, we may not be able to cancel your order as it might already be in processing or shipment. If you have already received an order confirmation email, it may be impossible to cancel your order. However, you can always request a return or exchange once your order arrives.

Q: Setting up DJI Goggles to O3 Air Unit

Unboxing & Charging : Unbox both devices and ensure they are fully charged. Install DJI Assistant 2 & Activate : Install DJI Assistant 2 (FPV Series). Connect the O3 Air Unit and Goggles via USB-C to activate them. Update Firmware : Ensure both devices are updated to the latest firmware. Pairing : Press the pair button on both the Air Unit and Goggles. Betaflight OSD : Configure the OSD via Betaflight for flight data display. Optimize Goggles Settings : Adjust resolution, frame rate, FOV, and bitrate. Final Testing : Power on, test video feed, and adjust settings as needed. For more detailed instructions, refer to DJI's guide here .

Q: iFlight Commando8 SD-Card Files

Restoring Factory SD-Card Files for iFlight Commando8 V2 If you own a Commando8 V2 ELRS radio controller and need to restore the SD-Card files due to corruption, loss, or simply to reset to factory settings, you can easily do so. Use the following link to access a complete copy of the factory SD-Card files. Simply download the files and transfer them to your SD-Card to restore your device. https://drive.google.com/drive/folders/1ccwn-OWPJY_qm6saO6a11p9oIg3vwwJ_

Experiencing signal range issues with your DJI video system can be frustrating, especially when it leads to reduced frame rates, lower video resolution, or complete loss of signal during flight. This comprehensive guide will help you diagnose and solve common signal problems with your DJI Air Unit and DJI FPV Goggles.

Common Signal Issues

Limited Range: The drone doesn't fly as far as expected before losing signal.
Video Feed Degradation: The live video feed experiences reduced frame rates and lower resolution when the signal weakens.
Complete Loss of Signal: The connection between the drone and FPV Goggles is entirely lost.

Potential Causes and Solutions

1. Ensure Line of Sight (LOS)

Cause: FPV drones rely heavily on a clear line of sight between the drone and the controller. Obstructions like buildings, dense trees, or terrain can block or weaken the signal.

Solution:

Maintain LOS: Always keep your drone within your visual line of sight to ensure the strongest possible signal.
Avoid Obstacles: Plan your flight path to minimize obstructions. Flying at a higher altitude can sometimes help maintain a clear LOS but always comply with local altitude regulations.
Understand Signal Propagation: Radio signals travel best in open spaces. Be aware that even small obstacles can have a significant impact on signal strength, especially at longer distances.

2. Antenna Orientation and Condition

Cause: Improper antenna setup can significantly reduce signal quality and range.

Solution:

Correct Installation: Ensure that all antennas on both the drone and the goggles are securely attached and oriented properly. For the DJI Air Unit, make sure the antennas are mounted away from carbon fiber parts, which is conductive and can block signals.
Optimal Positioning: The antennas should be positioned to maximize exposure to the signal. On the goggles, adjust the antennas to point in the general direction of the drone during flight.
Inspect for Damage: Regularly check antennas for any signs of wear, damage, or loose connections. Replace any damaged components promptly.
Antenna Upgrades: If you frequently experience range issues, consider upgrading to higher-gain or directional antennas designed for extended range.

3. Interference from Other Devices

Cause: The 2.4 GHz and 5.8 GHz frequency bands used by DJI drones are also used by many other devices, leading to potential interference.

Solution:

Manual Channel Selection: Use the manual channel selection feature to choose a channel with less interference. Monitor the channel environment through your goggles to identify the best option.
Avoid Urban Areas: Fly in areas with less electromagnetic interference. Rural or open spaces typically have fewer competing signals.
Use Public Frequency Bands Legally: Always ensure you are using frequencies that are legal in your country to avoid regulatory issues and potential fines.

4. Environmental Factors

Cause: Weather conditions and environmental elements can impact signal strength and quality.

Solution:

Check Weather Conditions: Avoid flying in rain, fog, snow, or high humidity, as moisture can absorb radio frequencies and weaken the signal.
Temperature Considerations: Extreme temperatures can affect battery performance and, consequently, signal transmission. Operate your equipment within the recommended temperature ranges.
Solar Activity: Be aware that high levels of solar activity can cause radio interference, although this is less common.

6. Firmware and Software Settings

Cause: Outdated firmware or incorrect settings can lead to suboptimal performance.

Solution:

Update Firmware: Regularly update the firmware of your drone, controller, and goggles to the latest versions provided by DJI.
Configure Video Transmission Settings: Adjust settings such as transmission power (within legal limits), channel mode (auto or manual), and resolution/frame rate to optimize performance.
Reset to Default Settings: If you experience issues after changing settings, consider resetting to factory defaults.
Check Compatibility: Ensure that all your devices (drone, goggles, controller) are compatible and properly bound to each other.

7. Physical Obstructions on the Drone

Cause: The placement of components on your drone can interfere with signal transmission.

Solution:

Antenna Placement: Make sure the antennas are not blocked by carbon fiber frames or other electronic components.
Tidy Wiring: Keep the wiring neat to prevent interference with antennas.
Avoid Metal Components: Metal parts near the antennas can cause signal reflection or absorption.

Additional Tips

Activating FCC Mode

Note: Activating FCC (Federal Communications Commission) mode can increase transmission power and extend range but may not be legal in all countries.

User Discretion Required: If you choose to activate FCC mode, you must do so at your own risk and responsibility.
Legal Compliance: Always ensure that operating in FCC mode complies with your local laws and regulations.
How to Activate: Methods to activate FCC mode are available with a Google Search.

Regular Maintenance

Clean Equipment: Keep your goggles and drone clean, especially the antennas, to ensure optimal performance.
Software Checks: Regularly check for software updates.

Frequently Asked Questions (FAQ)

Q1: Why does my video feed quality decrease as the drone flies further away?

A1: DJI's digital video systems adjust the video feed's frame rate and resolution based on signal strength to maintain a stable connection. As the drone moves further away or encounters interference, the system reduces quality to prevent feed loss.

Q2: Can I use aftermarket antennas to improve signal range?

A2: Yes, using higher-gain or directional aftermarket antennas can improve signal range and quality. Ensure that any antennas you use are compatible with your DJI equipment and comply with local regulations.

Q3: Is it legal to modify my drone to extend its range?

A3: Modifying your drone to extend its range, such as activating FCC mode in a region where it's not allowed, may violate local laws and regulations. Always check your country's drone operation regulations before making such modifications.

Q4: How can I identify if interference is causing my signal issues?

A4: Interference can often be identified by sudden drops in signal strength in specific areas or inconsistent performance.

Q5: What should I do if I lose signal during flight?

A5: FPV drones are equipped with Betaflight failsafe features like GPS Rescue. If you lose signal, avoid pressing additional controls and allow the drone to execute its failsafe procedure. Make sure GPS Rescue is properly set up before flight.

Q6: Can weather conditions really affect signal strength that much?

A6: Yes, weather conditions like rain, fog, and high humidity can absorb or scatter radio signals, reducing their effective range and strength.

Q7: How often should I update my firmware?

A7: Check for firmware updates regularly, ideally before each flight session. Updates can provide important fixes and improvements for signal transmission and overall performance.

Important Considerations

Legal Compliance: Always fly within the legal requirements of your country or region, including range and altitude limits.
Safety First: Do not compromise safety for extended range. Signal loss can lead to loss of control, posing risks to people and property.
Line of Sight: Remember that maintaining a visual line of sight is not just good for signal quality but is also a legal requirement in many jurisdictions.

Conclusion

Signal range issues with DJI video systems are often solvable by addressing factors such as line of sight, antenna setup, interference, and equipment maintenance. By methodically troubleshooting and applying the solutions provided, you can enhance your flying experience and minimize the chances of encountering video feed degradation or signal loss.

Remember, FPV drones are designed to operate within the pilot's line of sight. Flying behind large objects or beyond visual range not only increases the risk of signal loss but may also be illegal in your area. Always prioritize safety and legal compliance when flying your drone.

Question 12

Betaflight Modes Explained

Accepted Answer

Understanding Betaflight Modes

Betaflight is a popular open-source firmware for FPV multirotors and drones, offering various flight modes tailored to different flying styles and skill levels. This guide provides a concise overview of Betaflight modes to help you optimize your drone's performance and enhance your flying experience.

iFlight Factory Defaults (Shipping Defaults)

All iFlight BNFs (Bind-And-Fly Drones) are pre-configured with Angle Mode enabled by default to ensure safe and stable flight operations during first flight. If you wish to customize this setting, this guide provides step-by-step instructions to adjust the flight mode according to your personal preferences.

What Are Betaflight Modes?

Betaflight flight modes determine how your drone responds to control inputs and sensor data. Each mode offers different levels of stabilization and control, allowing pilots to customize their flying experience based on their skill level and desired performance.

Most Common Betaflight Flight Modes

1. Angle Mode (Stabilized Mode)

Stabilization: High

Control: Limited

Ideal For: Beginners seeking stability.

Self-Leveling: Automatically levels the drone when sticks are released.

Safety Limits: Restricts maximum tilt angles.

Pros: Easy to control, reduces crash risk.

Cons: Limited maneuverability, less responsive for advanced techniques.

2. Horizon Mode

Stabilization: Moderate

Control: Flexible

Ideal For: Pilots transitioning from beginner to advanced.

Self-Leveling with Acro Flexibility: Switches smoothly between Angle and Acro modes.

Intermediate Tilt Angles: Allows moderate flips and rolls.

Pros: Versatile, blends stabilized and acrobatic flying.

Cons: Requires practice to master transitions, less stable than Angle mode for beginners.

3. Acro Mode (Rate Mode)

Stabilization: None

Control: High

Ideal For: Advanced pilots seeking maximum control and maneuverability.

No Self-Leveling: Maintains orientation until changed by pilot.

Full Rate Control: Precise control over roll, pitch, and yaw rates.

Unlimited Maneuvers: Enables complex acrobatics.

Pros: Highly responsive and agile, perfect for freestyle and racing.

Cons: Steeper learning curve, higher crash risk without proper skill.

How to Configure Betaflight Modes

1. Connect Your Drone: Use a USB cable and open Betaflight Configurator.

Download Link: https://github.com/betaflight/betaflight-configurator/releases

2. Access Modes Tab: Navigate to the "Modes" section.

3. Add a Mode: Click "Add Range" under the desired flight mode.

4. Assign Switch: Select a transmitter switch to toggle the mode and set the activation range.

5. Save and Reboot: Apply changes by saving and rebooting the drone.

6. Test Settings: Verify mode activation using your transmitter.

Tips:

Assign separate switches for different modes.

Test configurations in a safe environment.

Backup settings before making changes.

Choosing the Right Mode for You

Beginners:

Angle Mode: Maximum stability and ease of control.

Horizon Mode: Balance between stability and maneuverability.

Intermediate Pilots:

Horizon Mode: Smooth transitions between stabilized and acrobatic flying.

Advanced Pilots:

Acro Mode: Full control for freestyle and racing.

Progression Tips:

1. Start with Angle Mode to build confidence.

2. Move to Horizon Mode for blended flying.

3. Advance to Acro Mode for high-performance control.

Tips for Safe and Effective Flying

Practice Gradually: Progress from simpler to more complex modes.

Calibrate Sensors: Ensure accurate stabilization.

Monitor Battery Levels: Prevent unexpected power loss by maintaining adequate battery charge.

Frequently Asked Questions

1. What is the best Betaflight mode for beginners?

Angle Mode is ideal due to its self-leveling feature and ease of control.

2. Can I switch between multiple modes during flight?

Yes, using a transmitter switch, you can toggle between different flight modes mid-flight.

3. What is the difference between Horizon and Acro Mode?

Horizon Mode blends stabilized and acrobatic controls, while Acro Mode offers full manual control without self-leveling.

4. How do I troubleshoot mode activation issues?

Ensure your transmitter is correctly bound, switches are properly assigned in Betaflight Configurator, and there are no conflicts in mode settings.

Conclusion

Understanding and configuring Betaflight modes is crucial for optimizing your drone's performance and tailoring your flying experience to your skill level. Whether you're a beginner seeking stability or an advanced pilot craving full control, Betaflight offers versatile modes to meet your needs. Follow this guide to confidently set up and utilize the right flight modes, enhancing your drone flying adventures.

For further assistance with configuring Betaflight settings, feel free to reach out to our support team!

Question 13

Setting up TBS Crossfire

Accepted Answer

1. Update Firmware

Before you start, ensure your transmitter and Crossfire module are running the latest firmware. This is critical for smooth functionality.

Update Crossfire Firmware:
- Download and install TBS Agent M.
- Connect your Crossfire module via USB to your computer.
- Use TBS Agent M to check for and install any firmware updates.
Update Transmitter Firmware:
- If you use an OpenTX/EdgeTX radio, ensure your radio’s firmware is up-to-date, particularly the Crossfire support module.

2. Install Crossfire Module in the Transmitter

Insert the Crossfire module into the back of your radio transmitter and power it on.

Configure the Radio Settings:
- Create a new model in the radio’s settings.
- Turn off Internal RF as the Crossfire module uses External RF.
- Set External RF to CRSF (Crossfire) mode.

3. Binding Crossfire Receiver

Once the module is installed, you need to bind it to your Crossfire receiver (RX).

Power up your drone, ensuring that the receiver is properly connected.
Press the bind button on the Crossfire module or use the binding command through the transmitter.
The receiver will automatically enter binding mode when powered up for the first time.
iFlight BNFs with TBS Crossfire receivers have been paired before at the factory for quality control inspection.
Wait for the successful bind confirmation on your radio’s display, indicated by a solid green light or signal bars.

4. Configure Betaflight Settings

After binding, you need to configure Betaflight to work with the Crossfire system.

UART Setup:
- Open Betaflight Configurator and connect your flight controller to your computer.
- Go to the Ports tab.
- Enable Serial RX on the UART that your Crossfire receiver is connected to.
- Save and reboot.
Receiver Setup:
- Go to the Configuration tab in Betaflight.
- Under Receiver, set the protocol to CRSF (Crossfire).
- Save and reboot.
Check Channel Mapping:
- Under the Receiver tab in Betaflight, verify that stick movements are properly registered.
- Use the channel mapping to ensure the correct channels are set (e.g., TAER1234 for Crossfire).

5. Adjust Failsafe Settings

Crossfire provides advanced failsafe options that can be configured directly through Betaflight.

Navigate to the Failsafe tab in Betaflight and set your desired failsafe behavior (e.g., dropping the drone or returning to home).

6. Test Your Setup

Before flying, test your setup to ensure everything is working correctly:

Ensure your Crossfire system is transmitting data and that the receiver is bound.
In Betaflight Configurator, verify that all transmitter inputs are reflected accurately.
Arm your drone safely in a test environment to confirm the connection and control.

Question 14

iFlight Commando 8 ELRS Module Reset

Accepted Answer

Have you flashed the Commando8 ELRS module incorrectly, incompletely, or even installed the wrong firmware? In this case, an endless 'Loading...' will be displayed when opening the ELRS Lua script file. Please follow the instructions to restore the ELRS module.

1.) Open the device: First, remove the two screws on the back of the Commando 8 and take the ELRS module out of the remote control.

2.) Launch ExpressELRS Configurator: Open the ExpressELRS Configurator on your PC.

3.) Select firmware: Choose the firmware you want to install, e.g., "3.4.0". Then, select the appropriate category for your device under "Device Type": either "iFlight 900MHz" or "iFlight 2.4GHz". Very important: Under "Device," you must select the correct version of your Commando 8, either "V1" or "V2".

4.) Adjust settings: Now, select the "UART" option. At the bottom, you can directly enter your BindingPhrase.

5.) Important driver: To ensure your computer recognizes the ELRS module of the Commando 8, you need to download the /dev/tty.usbserial-0001 Silicon Labs driver. You can find the driver here: Download Silicon Labs Driver.

6.) Connect ELRS module: Connect the ELRS module directly to your PC.

7.) Install firmware: Click on "Install on Device". Important: After clicking "Install on Device," the Configurator will begin building the firmware. Do not disconnect the device from the PC during this process.

8.) Complete the installation: Once the installation is complete, disconnect the module from your PC.

If you have followed all the steps correctly, your Commando 8 should now function perfectly again.

Question 15

Betaflight Advanced Guide

Accepted Answer

Keep in mind that iFlight BNFs (Bind-And-Fly Drones) come with a complete Set of Betaflight Settings out of the box. There's no need to change any settings, besides Modes or Rates most likely. We offer a separate Guide featuring our Betaflight Presets Database to conveniently recover to our Betaflight Factory Defaults.

Warning

Please note that updating your Betaflight firmware without utilizing our provided presets is done at your own risk. We are not responsible for any issues that may arise from such modifications.

Introduction to Betaflight Firmware

Betaflight is a powerful, open-source firmware designed specifically for FPV (First-Person View) drones and multirotors. It provides extensive customization options, allowing pilots to fine-tune their drones for optimal performance, stability, and responsiveness. Whether you're a beginner or an advanced pilot, understanding and properly setting up Betaflight is crucial for enhancing your flying experience.

Downloading and Installing Betaflight Configurator

Betaflight Configurator is a desktop application that serves as the interface between your computer and your drone's flight controller. It allows you to install, update, and configure the Betaflight firmware.

Download Link GitHub Releases: https://github.com/betaflight/betaflight-configurator/releases

Installation Steps

1. Download the Installer:

Visit the Betaflight Configurator Releases page.

Download the appropriate version for your operating system (Windows, macOS, or Linux).

2. Install the Application:

Windows: Run the .exe installer and follow the on-screen instructions.

macOS: Open the downloaded .dmg file and drag Betaflight Configurator to the Applications folder.

Linux: Follow the specific installation instructions provided in the release notes or use package managers if available.

3. Launch Betaflight Configurator:

After installation, open the application to ensure it runs correctly.

Connecting Your Flight Controller

Connection Method:

USB Cable: Use a reliable USB cable to connect your drone's flight controller to your computer.

Driver Installation:

Windows Users: Betaflight Configurator may prompt you to install necessary drivers (e.g., CP210x or STM32 drivers), easiest method for ARM flight controllers is using the ImpulseRC Driver Fixer. We have a separate 'Can't connect Betaflight' in the Troubleshooting section for a more detailed approach.

macOS and Linux Users: Drivers are typically handled automatically, but ensure your system recognizes the connected device.

Verifying Connection

Open Betaflight Configurator.

Ensure your flight controller is detected and the correct COM port is selected.

If not detected, try using a different USB cable or port and ensure drivers are correctly installed.

Backing Up Current Settings

Before making any changes, it's crucial to back up your current configuration. This allows you to restore your settings if something goes wrong during the setup process.

How to Backup

1. Open Betaflight Configurator:

Connect your drone and launch the application.

2. Navigate to the CLI Tab:

Click on the "CLI" (Command Line Interface) tab.

3. Save Current Configuration:

Type diff all and press Enter to view the current settings.

To save the entire configuration, type dump and copy the output to a text file on your computer.

4. Alternative Backup Method:

Use the "Backup" feature if available, or manually export configurations as per your flight controller's capabilities.

Flashing the Latest Firmware

Navigating to Firmware Flasher

1. Select the Firmware Flasher Tab:

In Betaflight Configurator, click on the "Firmware Flasher" tab.

2. Choose Firmware Version:

Select the appropriate Betaflight firmware version for your flight controller from the dropdown menu.

It's recommended to choose the latest stable release unless specific features are needed.

Flashing Process

1. Load Firmware:

Click on "Load Firmware [Online]" to download the selected firmware version.

2. Additional Options:

Full Chip Erase: Recommended for a clean installation.

Bootloader: Only select if necessary based on your flight controller's requirements.

3. Flash Firmware:

Click "Flash Firmware" to begin the process.

Do Not Disconnect: Ensure the USB connection remains stable until flashing is complete.

4. Completion:

Once flashing is successful, Betaflight Configurator will prompt you to reboot the flight controller.

Configuring Basic Settings

Receiver Setup

1. Navigate to the Receiver Tab:

Click on the "Receiver" tab in Betaflight Configurator.

2. Bind Your Transmitter:

Follow your transmitter's binding procedure to connect it to the receiver.

3. Select Receiver Mode:

Choose the appropriate receiver protocol (e.g., SBUS, CRSF) based on your hardware.

4. Verify Control Inputs:

Move the sticks on your transmitter and ensure the corresponding channels respond correctly in the Configurator.

Motor Direction and Layout

1. Verify Motor Rotation:

In the "Motors" tab, ensure each motor spins in the correct direction. Adjust wiring or settings if necessary.

2. Confirm Motor Layout:

Ensure that the physical motor layout matches the configuration in Betaflight. Adjust motor mappings if needed.

PID Tuning (Experts only)

Understanding PID

PID (Proportional, Integral, Derivative) settings control the responsiveness and stability of your drone. Proper tuning ensures smooth flight characteristics.

Adjusting PID Settings

1. Navigate to the PID Tuning Tab:

Click on the "PID Tuning" tab in Betaflight Configurator.

2. Initial Settings:

Start with default PID values provided by Betaflight.

3. Fine-Tuning:

Make incremental adjustments to the P, I, and D values based on flight performance.

Proportional (P): Affects the responsiveness to errors.

Integral (I): Addresses accumulated errors over time.

Derivative (D): Dampens the response to prevent oscillations.

4. Testing:

Conduct test flights after each adjustment to assess changes in behavior.

Aim for a balance between stability and responsiveness without oscillations or lag.

Setting Up Flight Modes

Available Flight Modes

Angle Mode: Self-leveling, ideal for beginners.

Horizon Mode: Combines Angle and Acro flexibility.

Acro Mode: Manual control without self-leveling, suited for advanced pilots.

Angle Lock Mode: Maintains a fixed orientation, useful for specific maneuvers.

Configuring Flight Modes

1. Navigate to the Modes Tab:

Click on the "Modes" tab in Betaflight Configurator.

2. Add a New Mode:

Click "Add Range" under the desired flight mode section.

3. Assign a Switch:

Choose a physical switch on your transmitter to toggle the mode.

Adjust the sliders to set the activation range (e.g., from 1000 to 2000 PWM).

4. Save and Reboot:

Click "Save and Reboot" to apply the changes.

5. Test Modes:

Use your transmitter to switch between modes and verify proper functionality during flight.

Calibrating Sensors and Accelerometers

Importance of Calibration

Accurate sensor calibration ensures stable and reliable flight performance by providing correct orientation and movement data to the flight controller.

Calibration Steps

1. Navigate to the Setup Tab:

Click on the "Setup" tab in Betaflight Configurator.

2. Calibrate Accelerometer:

Ensure the drone is placed on a flat, level surface.

Click "Calibrate Accelerometer" and follow on-screen instructions.

3. Verify Calibration:

Check that the orientation data reflects the drone's actual position.

Adjust settings if discrepancies are found.

Configuring OSD (On-Screen Display)

OSD overlays critical flight information (e.g., battery voltage, flight mode) onto your FPV video feed, enhancing situational awareness during flight.

Configuration Steps

1. Navigate to the OSD Tab:

Click on the "OSD" tab in Betaflight Configurator.

2. Enable OSD Elements:

Select the information you want to display, such as battery voltage, flight time, RSSI, and flight mode.

3. Arrange Layout:

Drag and drop elements to arrange their position on the screen for optimal visibility.

4. Save Settings:

Click "Save and Reboot" to apply the OSD configurations.

5. Verify OSD Display:

Check your FPV goggles or monitor to ensure the OSD elements are displaying correctly.

Advanced Configuration Options

Blackbox Logging

Blackbox is a feature that records flight data logs, which can be used for analyzing flight performance and troubleshooting issues.

Enabling Blackbox

1. Navigate to the Blackbox Tab:

Click on the "Blackbox" tab in Betaflight Configurator.

2. Enable Blackbox Logging:

Select the logging mode and storage options based on your flight controller's capabilities.

3. Start Logging:

Begin recording flight data during your test flights.

4. Review Logs:

Use Betaflight Configurator or other compatible software to analyze the logged data for performance insights.

Custom Configurations

Customizing Features

Custom Commands: Utilize the CLI to enter custom commands for specific configurations.

Flight Controller Specific Settings: Adjust settings unique to your flight controller model for optimized performance.

Testing Your Drone

Pre-Flight Checks

1. Verify All Settings:

Ensure that all configurations in Betaflight Configurator are correctly applied.

2. Motor Functionality:

Test motor responses without propellers to confirm correct operation and direction.

3. Control Response:

Check that all control inputs (throttle, pitch, roll, yaw) respond accurately in the Configurator.

Safety Measures

Remove Propellers: Ensure propellers are removed during initial testing to prevent accidents.

Safe Testing Area: Conduct tests in a spacious, open area free from obstacles.

Gradual Testing: Start with low throttle and simple maneuvers before attempting more complex flights.

Troubleshooting Common Issues

Connection Problems

Ensure Proper Drivers: Verify that all necessary drivers are installed.

Check USB Cable: Use a different USB cable or port if the flight controller is not detected.

Flight Controller Reset: Reset the flight controller if it fails to connect.

Firmware Flashing Errors

Stable Power Supply: Ensure a reliable power source during flashing to prevent interruptions.

Correct Firmware Version: Confirm that you are flashing the appropriate firmware version for your flight controller.

Retry Flashing: If flashing fails, attempt the process again, ensuring all steps are correctly followed.

Control Input Issues

Receiver Binding: Re-bind your transmitter to the receiver if controls are unresponsive.

Channel Mapping: Verify that channels are correctly mapped in Betaflight Configurator.

Signal Interference: Ensure there is no interference affecting the signal between the transmitter and receiver.

Flight Stability Problems

Sensor Calibration: Recalibrate sensors and accelerometers to ensure accurate stabilization.

PID Settings: Revisit PID tuning to achieve the desired balance between stability and responsiveness.

Mechanical Inspection: Check for any loose components or vibrations that may affect flight stability.

Tips for a Successful Setup

Use Quality Cables: Ensure a stable connection between your drone and computer by using high-quality USB cables.

Stable Power Supply: Prevent interruptions during firmware flashing by using a reliable power source.

Follow Manufacturer Guidelines: Refer to your drone’s manual for specific configuration settings and recommendations.

Regular Updates: Keep both Betaflight Configurator and your firmware updated to benefit from the latest features and improvements.

Community Support: Utilize forums and online communities for troubleshooting tips and advanced configuration advice.

Document Changes: Keep a record of all changes made during setup for easy troubleshooting and future reference.

Test Incrementally: Make and test changes one at a time to identify the impact of each adjustment.

Frequently Asked Questions

1. What is Betaflight Configurator used for?

Betaflight Configurator is a tool that allows you to install, update, and configure the Betaflight firmware on your drone's flight controller.

2. How often should I update the Betaflight firmware?

It's recommended to check for firmware updates regularly to benefit from the latest features, improvements, and bug fixes.

3. What should I do if my drone doesn't connect to Betaflight Configurator?

Ensure that drivers are correctly installed, try using a different USB cable or port, and verify that the flight controller is properly connected.

4. Can I customize PID settings in Betaflight?

Yes, Betaflight allows you to adjust PID settings to fine-tune your drone's flight characteristics based on your flying style and preferences.

5. How do I troubleshoot mode activation issues?

Ensure your transmitter is correctly bound, switches are properly assigned in Betaflight Configurator, and there are no conflicts in mode settings.

6. What is Blackbox logging and how do I use it?

Blackbox logging records flight data for analysis. Enable it in the Betaflight Configurator under the "Blackbox" tab and review logs using compatible software to diagnose flight performance.

7. How do I calibrate my drone's sensors?

Place your drone on a flat surface, navigate to the "Setup" tab in Betaflight Configurator, and follow the on-screen instructions to calibrate the accelerometers and other sensors.

Question 16

FPV Battery Charging, Discharging, Storage

Accepted Answer

FPV (First-Person View) drones are powered by lithium polymer (LiPo) batteries, which are known for their high energy density, lightweight nature, and ability to deliver high currents. However, LiPo batteries also require specific care to ensure their longevity, performance, and, most importantly, safety. Improper charging, discharging, storage, and handling of these batteries can lead to reduced performance, potential battery damage, or even fire hazards. This guide covers the best practices for handling FPV drone batteries to ensure they last long and remain safe for use.

1. Charging FPV Drone Batteries

Charging is one of the most critical stages in maintaining LiPo batteries. Here’s how to do it properly:

Use a Dedicated LiPo Charger: Always use a charger specifically designed for LiPo batteries. These chargers monitor the voltage and prevent overcharging, which is crucial for safety.
Charge in a Safe Environment: LiPo batteries can become volatile if not handled correctly. Always charge your battery in a fireproof bag (LiPo safe bag) and place it on a non-flammable surface like ceramic or metal. Never leave the battery unattended during charging.
Charge at a Safe Rate (1C): "C-rate" is a measure of how fast a battery can be charged or discharged. For safety and to extend battery life, charge your battery at 1C, which means charging at a rate equal to the battery's capacity. For example, if your battery has a 1300mAh capacity, charge it at 1.3 amps. Some batteries can handle faster charging rates, but 1C is the safest standard for long-term use.
Balance Charging: LiPo batteries consist of multiple cells, and it’s essential that each cell is charged evenly. Always use the balance charge mode on your charger to prevent overcharging one cell and damaging the battery. This maintains the health of all cells and ensures maximum performance.
Monitor Voltage and Temperature: Avoid charging batteries above 4.2 volts per cell, which is the safe maximum. Also, ensure that the battery doesn’t get too hot during charging. Excessive heat is a sign of damage or improper charging rates.

2. Discharging FPV Drone Batteries

Discharging your FPV drone battery correctly is vital to maintaining its health and preventing damage:

Avoid Over-Discharging: LiPo batteries should not be discharged below 3.5 volts per cell (under load) or 3.7 volts per cell (at rest). Draining a battery too low can cause irreversible damage to the cells, resulting in reduced capacity or complete failure. Using a low-voltage alarm or OSD (On-Screen Display) in your FPV setup can help you monitor the voltage during flight.
Manage Discharge Rates: High discharge rates are common in FPV drones, especially during aggressive flying. While LiPo batteries are designed to handle these, constantly flying at full throttle can shorten battery life. It's best to fly with a mix of throttle levels to reduce stress on the battery.
Let the Battery Cool Before Recharging: After a flight, the battery will be warm. It’s important to let it cool down to room temperature before charging it again. Charging a warm battery can lead to cell imbalance, overcharging, or even fire hazards.

3. Storing FPV Drone Batteries

Proper storage of LiPo batteries significantly extends their lifespan and ensures they remain safe for use:

Use Storage Charge: LiPo batteries should be stored at a voltage of around 3.7-3.85 volts per cell. Most LiPo chargers have a “storage charge” mode that ensures the battery is neither fully charged nor fully discharged, which helps prevent swelling or deterioration over time.
Store in a Cool, Dry Place: Heat and humidity can cause the battery cells to degrade. Store your batteries in a cool, dry environment, ideally between 10°C and 25°C (50°F and 77°F). Avoid storing them in extreme temperatures, such as in a car or direct sunlight, as this can lead to battery swelling or damage.
Use a Fireproof Container: Although rare, LiPo batteries can become unstable during storage and pose a fire hazard. Store them in a fireproof container or a LiPo-safe bag to minimize the risk of damage to your surroundings in case of a malfunction.

4. Handling FPV Drone Batteries

Safe handling of LiPo batteries ensures they remain in good working condition and reduces the risk of accidents:

Inspect Regularly for Damage: Always inspect your batteries for any signs of physical damage, such as swelling, punctures, or frayed wires. A damaged battery should not be used, charged, or stored with other batteries. If you notice any of these issues, safely dispose of the battery.
Avoid Short Circuits: When handling batteries, ensure that the terminals do not come into contact with each other or any conductive materials. Short-circuiting a LiPo battery can lead to immediate fire or explosion. Always store batteries with their terminals covered or use a protective cap.
Transporting Batteries: When transporting your FPV drone and batteries, ensure they are stored in a protective container, such as a LiPo-safe bag. This will minimize the risk of damage and fire hazards during transportation. When traveling by air, be sure to check regulations regarding carrying LiPo batteries, as they are often subject to restrictions.

5. Battery Disposal

LiPo batteries are hazardous waste and must be disposed of properly:

Discharge Fully: Before disposing of a LiPo battery, it should be fully discharged to minimize the risk of fire. Some chargers have a discharge mode, or you can safely discharge the battery by connecting it to a resistor or a discharge bag.
Recycle at a Designated Facility: Do not throw LiPo batteries in the trash. They contain chemicals that are harmful to the environment. Take your discharged batteries to a local electronics store or recycling center that handles LiPo disposal.

Conclusion

Caring for your FPV drone batteries properly is essential for performance, longevity, and safety. By following the proper procedures for charging, discharging, storing, and handling LiPo batteries, you’ll not only extend their lifespan but also reduce the risk of accidents and ensure a safer flying experience. Always stay vigilant for any signs of battery damage or instability, and never hesitate to take extra precautions when working with these powerful energy sources.

Question 17

iFlight Commando8 SD-Card Files

Accepted Answer

Restoring Factory SD-Card Files for iFlight Commando8 V2

If you own a Commando8 V2 ELRS radio controller and need to restore the SD-Card files due to corruption, loss, or simply to reset to factory settings, you can easily do so. Use the following link to access a complete copy of the factory SD-Card files. Simply download the files and transfer them to your SD-Card to restore your device.

https://drive.google.com/drive/folders/1ccwn-OWPJY_qm6saO6a11p9oIg3vwwJ_

Question 18

QuickStart Guide copy

Accepted Answer

Congratulations, you have just purchased your first iFlight BNF. We wish you save flights and a great time with your quadcopter.

We have some short steps to follow:

Step 1: Don't put your propellers on!

Leave the spin direction markers on the motors. We will need those for the last step putting on the propellers.

Step 2: Bind the receiver installed in your BNF to your transmitter.

Most quads can power the receiver through the USB cords. If you don't see the receiver LED come up, try again with a battery to confirm a.) if its powered on and b.) its position. The flight controller (FC) sits always around the center, the receiver (TBS Crossfire or ELRS) is about as big as your thumb and sits in the front or back, top or bottom mounted.

ATTENTION: Never plug in a battery if there is no antenna installed on your quad. This can possibly damage your video transmitter but also leads to overheating. Always keep the battery plugged in as short as possible if no cooling applied to the drone.

DJI FPV Radio Controller (RC2, RC3) do not have a separate receiver. The DJI video transmitter has an inbuilt receiver which connects to Goggle and Radio Controller. This can only be powered on by plugging in the battery.

If you don't know how to bind your receiver to your radio transmitter, please don't skip Step 3.
Skip Step 3 if you've already linked everything together.

Step 3: Follow Up with our Binding Guides

We have separated Setup Guides for ELRS, TBS Crossfire or DJI Radio Controllers. You'll know what you need to select.

Please come back after binding your receiver to your radio transmitter.

Step 4: Download and install the Betaflight Configurator

Step 5: Connect your computer to your drone with an USB cable.

Step 6: Download ImpulseRC driver fixer if you're on a windows computer.

Open the file while being connected to your drone. The tool will automatically detect the flight controller and install the windows drivers for Betaflight.

Step 7: Open the Betaflight Configurator.

We have to do some simple steps to doublecheck your equipment. Every iFlight BNF comes with a factory setup that contains a lot of settings to configure the flight controller, but also so called tune and filter setups that make your drone fly well.

Sidenote:

You don't need to change anything, you also don't need to update anything. If you plan to update, there is a separate advanced Guide which we don't need now. Updates should only be performed by advanced users with experience. Never try an update before doing some flights on the factory setup first.

Step 8: Quick Check:

On the first screen, you can see the drones' orientation, nothing to check here. Click on the 'Receiver' tab and confirm that your radio transmitter is correctly sending inputs. Plug in your battery to hear your drone bootup the first time. Try if the throttle stick is moving the throttle indicator.

Click on 'Modes' tab to setup your arming button. The standard for most people would be AUX1, and this is also recommended due to some technical aspects of the software. For DJI Radio Controllers please use any button you like to arm. To assign a AUX channel just click on the Dropdown in the Arm field and select AUTO, then move the button you want to link.

Angle Mode is activated by default across the entire selection range of channel AUX2. If you don't want to use this leveling mode just smaller the selection range and assign AUX2 to a button on your radio controller to activate or deactivate this function at any time.

Help Center

Menu

Shop

About

Položka přidána do košíku

Mezisoučet: