Über

Beschreibung

Our latest BLITZ Mini Flight Controller used in our iFlight BNFs. Ultra fast F7 MCU for 2-6S batteries. 20x20 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging, with LC filter.

 

Specifications:

MCU: STM32 F722

Gyro: ICM42688

Barometer: DPS310

OSD Chip: AT7456

Flash: 8MB (Blackbox flash)

UARTS: 6

Motor outputs: 4x (SH1.0 connector)

I2C serial: SDA/SLA pads

Smartaudio / IRC Tramp VTX protocol supported

LED controller: Yes

Beeper pad: Yes

Firmware target: IFRC-IFLIGHT_BLITZ_F722

Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws

Dimensions: 30.5x27 mm

Weight: 5g

 

Wiring Suggestions:

UART 1 for VTX HD / Analog

UART 2 for a Receiver

UART 3/4/5 for GPS or other sensors that require a serial port

UART 6 for ESC Telemetry

 

Wiring Diagram:

https://drive.google.com/drive/u/1/folders/17Uf67I6ER_z-otviR0I7tSqO31W7S553

 

Packing List:

1 x BLITZ Mini F7 V1.2 Flight Controller

1 x FC connectors

1 x Silicon grommets

Beschreibung

Our latest BLITZ Mini Flight Controller used in our iFlight BNFs. Ultra fast F7 MCU for 2-6S batteries. 20x20 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging, with LC filter.

 

Specifications:

MCU: STM32 F722

Gyro: ICM42688

Barometer: DPS310

OSD Chip: AT7456

Flash: 8MB (Blackbox flash)

UARTS: 6

Motor outputs: 4x (SH1.0 connector)

I2C serial: SDA/SLA pads

Smartaudio / IRC Tramp VTX protocol supported

LED controller: Yes

Beeper pad: Yes

Firmware target: IFRC-IFLIGHT_BLITZ_F722

Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws

Dimensions: 30.5x27 mm

Weight: 5g

 

Wiring Suggestions:

UART 1 for VTX HD / Analog

UART 2 for a Receiver

UART 3/4/5 for GPS or other sensors that require a serial port

UART 6 for ESC Telemetry

 

Wiring Diagram:

https://drive.google.com/drive/u/1/folders/17Uf67I6ER_z-otviR0I7tSqO31W7S553

 

Packing List:

1 x BLITZ Mini F7 V1.2 Flight Controller

1 x FC connectors

1 x Silicon grommets

Verdienen Sie Cashback bei jedem Einkauf
Erhalten Sie Treuepunkte für alle Einkäufe.
Electronics von iFlight-RC Europe

BLITZ Mini F7 V1.2 Flight Controller

Normaler Preis
€76,90
Verkaufspreis
€76,90
Normaler Preis
Steuern inklusive.
Our latest BLITZ Mini Flight Controller used in our iFlight BNFs. Ultra fast F7 MCU for 2-6S batteries. 20x20 mounting pattern. ...  Weiterlesen
Our latest BLITZ Mini Flight Controller used in our iFlight BNFs. Ultra fast F7 MCU for 2-6S batteries. 20x20 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging, with LC filter.
19 jetzt auf Lager
Offizieller iFlight-RC Europe Store
Produkte werden aus Österreich versendet
Keine Zusatzgebühren für EU-Mitgliedstaaten
Exkl. GB, CH, NO, LI, etc.
Blitzschneller Versand
Express, Standard oder Gratis
Europa Shop Benefits
6 Monate kostenlose Reparaturen (exkl. Teile)

B2B Accounts verfügbar

Business Application Form

Schauen Sie sich diese verwandten Produkte an