About
Brushless Gimbal Motor Encoder Combo Set (A5048A Integrated)
The iPower GM4108H-120T Encoder Combo Set is a professional-grade motor and encoder package designed for high-precision 3-axis brushless gimbal stabilizers.
Each GM4108H-120T motor is paired with an integrated A5048A encoder, providing real-time motor position feedback for unmatched stability, smoother motion control, and outstanding energy efficiency.
This combo delivers fast torque response, accurate movement on all three axes, and up to 5× longer battery life — making it ideal for aerial filming, handheld stabilizers, and professional camera rigs.
Features
Integrated Encoder System – GM4108H motor with A5048A encoder for precise position tracking.
High Stability – Smooth and accurate control across Pan, Tilt, and Roll axes.
Energy Efficient – Up to 5× longer operating time compared to non-encoder motors.
Instant Torque Response – Quick motor reaction for dynamic or complex movement.
Twin IMU Compatible – Enhanced precision with dual sensor feedback.
Easy Setup – Simple tuning, minimal calibration needed.
GM4108 Gimbal Motor Specifications
Model: GM4108H
Motor Out Diameter: Ф47±0.05mm
Configuration: 24N/22P
Motor Height: 32.3±0.2mm (Included with Encoder housing)
Hollow Shaft(OD): Ф10-0.008/-0.012mm
Hollow Shaft(ID): 8+0.05/0mm
Wire Length: 265±3mm
Cable AWG: #24
Motor Weight: 137±0.5g
Wire plug: 2.5mm dupont connector
No-load current: 0.07±0.1A
No-load volts: 20V
No-load Rpm: 513~567 RPM
Load current: 1.5A
Load volts: 20V
Load torque(g): 1200-1800
Motor internal resistance: 11.1Ω±5%（Resistance varies with temperature）
High voltage test: DC500V 1mA@2sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): Clockwise
High-low temperature test：
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤25W
Working current: 3-5S
Working temperature: -20~60℃;10~90%RH
Compatible Sliprings
iPower Gimbal Motor Slipring - OD 7.9mm
Packing List
3 x GM4108H-120T Gimbal Motor with AS5048A Encoder & Magnet
1 x Alexmos 32BIT BGC Board Encoder version without alum case
1 x Connecting cables set
Brushless Gimbal Motor Encoder Combo Set (A5048A Integrated)
The iPower GM4108H-120T Encoder Combo Set is a professional-grade motor and encoder package designed for high-precision 3-axis brushless gimbal stabilizers.
Each GM4108H-120T motor is paired with an integrated A5048A encoder, providing real-time motor position feedback for unmatched stability, smoother motion control, and outstanding energy efficiency.
This combo delivers fast torque response, accurate movement on all three axes, and up to 5× longer battery life — making it ideal for aerial filming, handheld stabilizers, and professional camera rigs.
Features
Integrated Encoder System – GM4108H motor with A5048A encoder for precise position tracking.
High Stability – Smooth and accurate control across Pan, Tilt, and Roll axes.
Energy Efficient – Up to 5× longer operating time compared to non-encoder motors.
Instant Torque Response – Quick motor reaction for dynamic or complex movement.
Twin IMU Compatible – Enhanced precision with dual sensor feedback.
Easy Setup – Simple tuning, minimal calibration needed.
GM4108 Gimbal Motor Specifications
Model: GM4108H
Motor Out Diameter: Ф47±0.05mm
Configuration: 24N/22P
Motor Height: 32.3±0.2mm (Included with Encoder housing)
Hollow Shaft(OD): Ф10-0.008/-0.012mm
Hollow Shaft(ID): 8+0.05/0mm
Wire Length: 265±3mm
Cable AWG: #24
Motor Weight: 137±0.5g
Wire plug: 2.5mm dupont connector
No-load current: 0.07±0.1A
No-load volts: 20V
No-load Rpm: 513~567 RPM
Load current: 1.5A
Load volts: 20V
Load torque(g): 1200-1800
Motor internal resistance: 11.1Ω±5%（Resistance varies with temperature）
High voltage test: DC500V 1mA@2sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): Clockwise
High-low temperature test：
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤25W
Working current: 3-5S
Working temperature: -20~60℃;10~90%RH
Compatible Sliprings
iPower Gimbal Motor Slipring - OD 7.9mm
Packing List
3 x GM4108H-120T Gimbal Motor with AS5048A Encoder & Magnet
1 x Alexmos 32BIT BGC Board Encoder version without alum case
1 x Connecting cables set
iPower GM4108H-120T Encoder Combo Set
- Regular price
- €486,14
- Sale price
- €486,14
- Regular price
-
€540,16
Am I available?
Taxes and duties included?
Crashed hard?
iPower GM4108H-120T Encoder Combo Set
- Regular price
- €486,14
- Sale price
- €486,14
- Regular price
-
€540,16