Über
The GM2804H motor by iPower Motors is the ultimate brushless gimbal motor for GoPro Cameras. This motor is designed for small multi-rotor platforms looking to lift GoPro sized gear – 0.5-1KG/cm Torque.
The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
Specifications:
Model: GM2804
Motor Out Diameter: Ф35±0.05mm
Configuration: 12N/14P
Motor Height: 25±0.2mm (Included with Encoder housing)
Hollow Shaft(OD): Ф8-0.008/-0.012 mm
Hollow Shaft(ID): Ф6.5+0.05/0 mm
Wire Length: 60±3mm
Cable AWG: #24
Motor Weight: 51±0.2g
Wire plug: PH3P connector
No-load current: 0.09±0.05 A
No-load volts: 10 V
No-load Rpm: 1602~1771 RPM
Load current: 0.8 A
Load volts: 10 V
Load torque(g·cm): 250-350
Motor internal resistance: 9Ω±5%(Resistance varies with temperature)
High voltage test: DC500V 1mA @2sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): clockwise
High-low temperature test:
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤25W
Working current: 2-3S
Working temperature: -20~60℃;10~90%RH
Packing List:
1 x iPower GM2804H Gimbal Motor
1 x AS5048A Encoder with aluminum case
The GM2804H motor by iPower Motors is the ultimate brushless gimbal motor for GoPro Cameras. This motor is designed for small multi-rotor platforms looking to lift GoPro sized gear – 0.5-1KG/cm Torque.
The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
Specifications:
Model: GM2804
Motor Out Diameter: Ф35±0.05mm
Configuration: 12N/14P
Motor Height: 25±0.2mm (Included with Encoder housing)
Hollow Shaft(OD): Ф8-0.008/-0.012 mm
Hollow Shaft(ID): Ф6.5+0.05/0 mm
Wire Length: 60±3mm
Cable AWG: #24
Motor Weight: 51±0.2g
Wire plug: PH3P connector
No-load current: 0.09±0.05 A
No-load volts: 10 V
No-load Rpm: 1602~1771 RPM
Load current: 0.8 A
Load volts: 10 V
Load torque(g·cm): 250-350
Motor internal resistance: 9Ω±5%(Resistance varies with temperature)
High voltage test: DC500V 1mA @2sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): clockwise
High-low temperature test:
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤25W
Working current: 2-3S
Working temperature: -20~60℃;10~90%RH
Packing List:
1 x iPower GM2804H Gimbal Motor
1 x AS5048A Encoder with aluminum case
iPower GM2804 Gimbal Motor w/Encoder
- Normaler Preis
- €46,81
- Verkaufspreis
- €46,81
- Normaler Preis
-