{"title":"Nazgul Series FPV Drones","description":"\u003cp\u003eLegendary FPV drones known for their power, durability, and performance right out of the box\u003c\/p\u003e","products":[{"product_id":"nazgul-xl10-v6-6s-analog","title":"Nazgul XL10 V6 6S GPS ANALOG","description":"\u003ch3\u003eHighlights:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull 3K Carbon Fiber airframe\u003c\/li\u003e\n\u003cli\u003ePopular True-X configuration\u003c\/li\u003e\n\u003cli\u003eBig size XING2 3314 with extreme lift and flight performance\u003c\/li\u003e\n\u003cli\u003eGPS module pre-installed (BF GPS rescue or INAV GPS RTH feature available)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003eProduct Name: XL10 V6 Analog 10 inch\u003c\/p\u003e\n\u003cp\u003eFC: BLITZ F722 Flight Controller\u003c\/p\u003e\n\u003cp\u003eESC: BLITZ E55 4-IN-1 2-6S 55A ESC\u003c\/p\u003e\n\u003cp\u003eVideo Transmission: BLITZ Whoop 1.6W VTX\/ BLITZ whoop 2.5W VTX\u003c\/p\u003e\n\u003cp\u003eFrame diagonal motor distance: 420mm\u003c\/p\u003e\n\u003cp\u003eMotor: XING2 3314 900KV motors\u003c\/p\u003e\n\u003cp\u003eProp: 10X4.5X3 propellers\u003c\/p\u003e\n\u003cp\u003eWeight: 860g (Without Battery)\u003c\/p\u003e\n\u003cp\u003eDimensions (L×W×H)：297x297x35mm\u003c\/p\u003e\n\u003cp\u003eMax Speed: 140km\/h\u003c\/p\u003e\n\u003cp\u003eMaximum Takeoff Altitude: 6000 m\u003c\/p\u003e\n\u003cp\u003eMax Hover Time: Approx. 40 mins (with 6S2P 8000mAh no load)\u003c\/p\u003e\n\u003cp\u003eMax Wind Speed Resistance: Level 7\u003c\/p\u003e\n\u003cp\u003eOperating Temperature Range: -10° to 40° C (14° to 104° F)\u003c\/p\u003e\n\u003cp\u003eAntennas: Single Antenna\u003c\/p\u003e\n\u003cp\u003eGNSS: GPS+SBAS+Galileo+QZSS+Glonass\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eVideo Transmission (optional):\u003c\/h3\u003e\n\u003cp\u003eProduct Name: BLITZ 1.6W VTX\u003c\/p\u003e\n\u003cp\u003eOutput Power: 0-25-400-800-1600mw\u003c\/p\u003e\n\u003cp\u003eInput Volts: 12V\u003c\/p\u003e\n\u003cp\u003eWorking Current: ≤pit @40mA，≤25mw@150mA，≤400mw@330mA，≤800mw@460mA，≤1600mw@660mA\u003c\/p\u003e\n\u003cp\u003eTransmission fre: 40CH(A-B-E-F-R)\u003c\/p\u003e\n\u003cp\u003eAntenna Interface: IPEX\u003c\/p\u003e\n\u003cp\u003eMounting Hole: 25*25\/φ1.6mm\u003c\/p\u003e\n\u003cp\u003eWeight: 16.5 grams (Without antenna and cable)\u003c\/p\u003e\n\u003cp\u003eDimensions: L37mm*W31.5mm*H10mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Name: BLITZ Whoop 5.8GHz 2.5W VTX\u003c\/p\u003e\n\u003cp\u003eOutput Power: 0-25-400-1000-2500mw\u003c\/p\u003e\n\u003cp\u003eInput Volts: 7-34V\u003c\/p\u003e\n\u003cp\u003eWorking Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA\u003c\/p\u003e\n\u003cp\u003eTransmission fre: 40CH(A-B-E-F-R)\u003c\/p\u003e\n\u003cp\u003eAntenna Interface: MMCX\u003c\/p\u003e\n\u003cp\u003eMounting Hole: 25*25\/φ1.6mm\u003c\/p\u003e\n\u003cp\u003eWeight: 32g\u003c\/p\u003e\n\u003cp\u003eDimensions: 50*30*16mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePacking List:\u003c\/h3\u003e\n\u003cp\u003e1 x XL10 V6 6S Analog BNF\u003c\/p\u003e\n\u003cp\u003e1 x Battery pad\u003c\/p\u003e\n\u003cp\u003e1 x Antennas\u003c\/p\u003e\n\u003cp\u003e1 x Propellers(Pair)\u003c\/p\u003e\n\u003cp\u003e2 x Battery strap\u003c\/p\u003e\n\u003cp\u003e1 x Screw Bag\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eNotice:\u003c\/h3\u003e\n\u003cp\u003eAll iFlight BNFs are tested before shipment to guarantee highest quality. \u003c\/p\u003e\n\u003cp\u003eIf you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.\u003c\/p\u003e","brand":"iFlight","offers":[{"title":"No RX (PNP) \/ 5.8G 2.5W VTX","offer_id":44614352175369,"sku":"L014477","price":631.99,"currency_code":"EUR","in_stock":true},{"title":"TBS Crossfire NANO RX \/ 5.8G 2.5W VTX","offer_id":44614352208137,"sku":"L014476","price":666.99,"currency_code":"EUR","in_stock":true},{"title":"ELRS 2.4GHz RX \/ 5.8G 2.5W VTX","offer_id":44614352240905,"sku":"L014478","price":651.99,"currency_code":"EUR","in_stock":true},{"title":"ELRS 868\/915MHz RX \/ 5.8G 2.5W VTX","offer_id":44614352273673,"sku":"L014479","price":651.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/0527\/9753\/products\/nazgul-xl10-v6-6s-analog-638839.png?v=1692834911"},{"product_id":"nazgul-xl5-eco-v1-1-6s-analog","title":"Nazgul XL5 ECO V1.1 6S ANALOG","description":"\u003cp\u003eThe Nazgul ECO XL5 V1.1 6S Analog is a lightweight and cost-effective 5-inch freestyle BNF drone for pilots who want a classic analog FPV setup with strong 6S performance.\u003c\/p\u003e\n\u003cp\u003eWith its True-X geometry, BLITZ F7 Flight Controller, BLITZ E55 4-IN-1 ESC, BLITZ 5.8GHz 1.6W VTX, XING-E Pro 2207 1800KV motors, and Nazgul F5 propellers, the XL5 ECO is a practical platform for freestyle, training, everyday flying, and analog FPV setups.\u003c\/p\u003e\n\u003cp\u003eThis is the analog XL5 version. It is designed for analog FPV goggles or goggles with a compatible analog receiver module. DJI Goggles, Walksnail goggles, and HDZero goggles are not directly compatible unless they are used with a suitable analog video receiver.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLightweight and Durable\u003c\/strong\u003e\u003cbr\u003eThe Nazgul XL5 ECO combines a carbon fiber frame with an aluminum camera mount, creating a lightweight yet robust platform for 5-inch freestyle flying.\u003c\/p\u003e\n\u003cp\u003eIts True-X geometry is designed for a direct, symmetrical, and responsive flight feel. This makes the XL5 ECO well suited for freestyle, everyday practice, quick direction changes, and classic analog FPV flying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnti-Spark Filter\u003cbr\u003e\u003c\/strong\u003eConnecting a 6S battery can create a visible spark at the XT60 connector. This is caused by the initial current rush into the ESC and capacitor system.\u003c\/p\u003e\n\u003cp\u003eThe integrated Anti-Spark Filter helps reduce plug-in spark, protects the XT60 connector from unnecessary wear, and helps reduce sudden voltage and current spikes when connecting the battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBLITZ F7 Stack – Updated Electronics\u003cbr\u003e\u003c\/strong\u003eThe current version of the Nazgul ECO XL5 V1.1 uses the BLITZ F7 Flight Controller together with the BLITZ E55 4-IN-1 ESC.\u003c\/p\u003e\n\u003cp\u003eThis update replaces the earlier BLITZ ATF435 \/ E55S stack and provides a modern base for reliable 6S performance, clean Betaflight configuration, and practical maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBLITZ 5.8GHz 1.6W Analog VTX\u003c\/strong\u003e\u003cbr\u003eThe pre-installed BLITZ 5.8GHz 1.6W VTX provides a strong analog video signal for classic 5.8GHz analog FPV setups.\u003c\/p\u003e\n\u003cp\u003eActual range depends on local regulations, selected channel, antenna setup, environment, and VTX output power. Please always follow the legal frequency and power limits in your country.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced User Experience and Easier Maintenance\u003cbr\u003e\u003c\/strong\u003eThe XL5 ECO comes with an integrated buzzer, a receiver mounting area, and side panels installed by default.\u003c\/p\u003e\n\u003cp\u003eThis helps keep the build cleaner, improves protection around the internal electronics, and makes maintenance, troubleshooting, and receiver access easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIY Customization Space\u003cbr\u003e\u003c\/strong\u003eThe frame provides standard 20×20mm and 30.5×30.5mm mounting options.\u003c\/p\u003e\n\u003cp\u003eThis keeps the XL5 ECO flexible for maintenance, repairs, and future modifications. Many common FPV components, flight stacks, and VTX systems can be integrated more easily into the frame layout.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBNF Factory Setup\u003c\/h3\u003e\n\u003cp\u003eThis drone is delivered as a BNF, which means Bind-and-Fly.\u003c\/p\u003e\n\u003cp\u003eIt is assembled, factory configured, and tested before shipment. However, BNF does not mean Ready-to-Fly. The drone still needs to be bound to a compatible radio controller before the first flight.\u003c\/p\u003e\n\u003cp\u003eBefore the first flight, check all screws, motor direction, propeller orientation, failsafe behavior, video channel, OSD, Betaflight modes, and voltage warning settings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReadyFly Kits – Complete FPV Sets Available\u003c\/h3\u003e\n\u003cp\u003eThis product is sold as a BNF drone.\u003c\/p\u003e\n\u003cp\u003eBNF means Bind-and-Fly: the drone is assembled, tuned, and equipped with the selected receiver version, but it still needs to be bound to a compatible radio controller before flight.\u003c\/p\u003e\n\u003cp\u003eIf you need a complete FPV setup, we also offer ReadyFly Kits or compatible accessory bundles in our shop. These make it easier to combine suitable goggles, radio controller, batteries, charger, and accessories.\u003c\/p\u003e\n\u003cp\u003eChoose this BNF drone if you already have compatible analog FPV equipment.\u003c\/p\u003e\n\u003cp\u003eChoose a ReadyFly Kit or accessory bundle if you want a more complete FPV setup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eRequired to Fly\u003c\/h3\u003e\n\u003cp\u003eThis is a BNF drone, not a complete ReadyFly Kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou also need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible analog FPV goggles or goggles with an analog video receiver\u003c\/li\u003e\n\u003cli\u003eCompatible radio controller matching the selected receiver version\u003c\/li\u003e\n\u003cli\u003eSuitable 6S battery\u003c\/li\u003e\n\u003cli\u003e6S-compatible LiPo\/Li-Ion balance charger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included with the BNF drone:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBattery\u003c\/li\u003e\n\u003cli\u003eCharger\u003c\/li\u003e\n\u003cli\u003eFPV goggles\u003c\/li\u003e\n\u003cli\u003eRadio controller\u003c\/li\u003e\n\u003cli\u003eAction camera\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChoose the Correct Receiver Version\u003c\/p\u003e\n\u003cp\u003ePlease choose the receiver version that matches your radio controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable receiver versions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePNP \/ Without RX\u003c\/li\u003e\n\u003cli\u003eTBS Crossfire Nano RX\u003c\/li\u003e\n\u003cli\u003eiFlight ELRS 2.4GHz RX\u003c\/li\u003e\n\u003cli\u003eiFlight ELRS 868\/915MHz RX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe analog VTX is responsible only for video transmission. The selected receiver version determines how the drone receives control commands from your radio controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePNP \/ Without RX\u003c\/strong\u003e\u003cbr\u003eChoose this version only if you want to install your own receiver.\u003c\/p\u003e\n\u003cp\u003eThis version does not include a radio receiver. A compatible receiver must be installed, wired, configured in Betaflight, and tested by the customer before flight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELRS 2.4GHz Version\u003c\/strong\u003e\u003cbr\u003eChoose this version if you use an ELRS 2.4GHz radio controller, for example an iFlight Commando 8 or Commando 14 ELRS 2.4GHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELRS 868\/915MHz Version\u003c\/strong\u003e\u003cbr\u003eChoose this version only if your radio controller or external module supports ELRS 868\/915MHz.\u003c\/p\u003e\n\u003cp\u003eELRS 2.4GHz and ELRS 868\/915MHz are not compatible with each other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTBS Crossfire Version\u003c\/strong\u003e\u003cbr\u003eChoose this version if you use a TBS Crossfire radio or a compatible Crossfire module.\u003c\/p\u003e\n\u003cp\u003eIf you are not sure which version matches your radio controller, please contact us before ordering.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cp\u003eThis product is available with different GPS options depending on the selected variant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo GPS Version\u003c\/strong\u003e\u003cbr\u003eChoose this version if you do not need GPS from the factory or if you prefer to install your own GPS module later.\u003c\/p\u003e\n\u003cp\u003eThis version does not include a pre-installed GPS module. GPS functions such as GPS coordinates, GPS telemetry, and Betaflight GPS Rescue are not available unless a compatible GPS module is installed, wired, configured, and tested by the customer.\u003c\/p\u003e\n\u003cp\u003eThe rear of the drone is prepared for GPS installation. To add GPS later, the customer needs a compatible GPS module, a suitable TPU GPS holder, the required tools, wiring, and the technical knowledge to connect the GPS to the flight controller and configure it correctly in Betaflight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPS Pre-Installed Version\u003cbr\u003e\u003c\/strong\u003eChoose this version if you want the drone to include a factory-installed GPS module.\u003c\/p\u003e\n\u003cp\u003eThe GPS version can support GPS coordinates, telemetry, and Betaflight GPS Rescue after correct setup and testing by the pilot.\u003c\/p\u003e\n\u003cp\u003eImportant: GPS Rescue is not enabled by default and must not be treated as a guaranteed return-to-home function. It must be configured, checked, and tested carefully before use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBattery Recommendations\u003c\/h3\u003e\n\u003cp\u003eThis drone is designed for 6S batteries.\u003c\/p\u003e\n\u003cp\u003eMost pilots use batteries between 1380mAh and 2200mAh.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFreestyle \/ responsive flying:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6S 1380–1550mAh LiPo with high discharge rate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral flying:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6S 1480–1550mAh LiPo with high discharge rate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCinematic \/ GoPro-style flying:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6S 1550–1850mAh LiPo with high discharge rate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLonger smooth cruising:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6S 1850–2200mAh LiPo with high discharge rate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum endurance \/ smooth cruising only:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDOGCOM 6S1P 4000mAh Li-Ion\u003c\/p\u003e\n\u003cp\u003eDOGCOM 6S1P 5000mAh Li-Ion\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Li-Ion Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLi-Ion batteries are recommended only for smooth cruising and endurance-oriented flying. They are not suitable for aggressive freestyle, racing, repeated punch-outs, or high-current flying.\u003c\/p\u003e\n\u003cp\u003eLi-Ion batteries behave differently from LiPo batteries and may require adjusted Betaflight voltage warnings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAction Camera Support\u003c\/h3\u003e\n\u003cp\u003eThe Nazgul XL5 ECO has a front mounting position for a GoPro or similar action camera when a compatible mount is used.\u003c\/p\u003e\n\u003cp\u003eAdding an action camera increases takeoff weight, changes flight behavior, increases current draw, and usually reduces flight time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cp\u003eDefault Propeller: Nazgul F5 Tri-Blade Prop\u003c\/p\u003e\n\u003cp\u003eOptional Propeller: GEMFAN Hurricane MAX 51377 Prop for Nazgul\u003c\/p\u003e\n\u003cp\u003eFreestyle Battery: DOGCOM 6S 1550mAh 150C Ultra Series Battery\u003c\/p\u003e\n\u003cp\u003eCinematic Battery: DOGCOM 6S 1850mAh 150C Battery\u003c\/p\u003e\n\u003cp\u003eLonger Cruising Battery: DOGCOM 6S 2200mAh 150C Battery\u003c\/p\u003e\n\u003cp\u003eMaximum Range: DOGCOM 6S1P 5000mAh Li-Ion Battery\u003c\/p\u003e\n\u003cp\u003eCharger: HOTA D6 Pro 650W 1–6S Dual Channel AC\/DC Smart Charger\u003c\/p\u003e\n\u003cp\u003eGoPro Mount: 2RAW Slim GoPro TPU Mount\u003c\/p\u003e\n\u003cp\u003eTPU Parts: Nazgul ECO DC5 \/ XL5 TPU Parts\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003eProduct Name: Nazgul ECO XL5 V1.1 6S Analog BNF\u003c\/p\u003e\n\u003cp\u003eProduct Type: 5-inch BNF FPV drone\u003c\/p\u003e\n\u003cp\u003eRecommended Skill Level: Intermediate to experienced FPV pilots\u003c\/p\u003e\n\u003cp\u003eVideo System: BLITZ 5.8GHz 1.6W Analog VTX\u003c\/p\u003e\n\u003cp\u003eReceiver Options: PNP \/ Without RX, TBS Crossfire Nano RX, iFlight ELRS 2.4GHz RX, iFlight ELRS 868\/915MHz RX\u003c\/p\u003e\n\u003cp\u003eGPS Options: No GPS \/ GPS Pre-Installed, depending on selected variant\u003c\/p\u003e\n\u003cp\u003eGPS Mounting: Rear GPS mounting position prepared\u003c\/p\u003e\n\u003cp\u003eGeometry: True-X\u003c\/p\u003e\n\u003cp\u003eFrame Diagonal Motor Distance: 245mm\u003c\/p\u003e\n\u003cp\u003eFlight Controller: BLITZ F7 Flight Controller\u003c\/p\u003e\n\u003cp\u003eESC: BLITZ E55 4-IN-1 ESC\u003c\/p\u003e\n\u003cp\u003eMotor: XING-E Pro 2207 1800KV\u003c\/p\u003e\n\u003cp\u003ePropellers: Nazgul F5 Propellers\u003c\/p\u003e\n\u003cp\u003eBattery Input: 6S\u003c\/p\u003e\n\u003cp\u003eRecommended Battery Type: 6S LiPo\u003c\/p\u003e\n\u003cp\u003eCommon LiPo Battery Range: 1380mAh–2200mAh\u003c\/p\u003e\n\u003cp\u003eLi-Ion Compatibility: 6S1P 4000mAh \/ 5000mAh Li-Ion only for smooth cruising\u003c\/p\u003e\n\u003cp\u003eWeight: approx. 427g without battery\u003c\/p\u003e\n\u003cp\u003eApprox. Takeoff Weight: approx. 652g with 6S 1400mAh battery\u003c\/p\u003e\n\u003cp\u003eDimensions: 173 × 173 × 34mm ±2mm\u003c\/p\u003e\n\u003cp\u003eMaximum Speed: approx. 190km\/h\u003c\/p\u003e\n\u003cp\u003eMaximum Takeoff Altitude: approx. 7000m\u003c\/p\u003e\n\u003cp\u003eMaximum Hover Time: approx. 11.5 minutes without payload with 6S 1550mAh battery, depending on conditions\u003c\/p\u003e\n\u003cp\u003eOperating Temperature Range: -10°C to 40°C\u003c\/p\u003e\n\u003cp\u003eAntenna: Single antenna\u003c\/p\u003e\n\u003cp\u003eGPS: Optional, depending on selected variant\u003c\/p\u003e\n\u003cp\u003eGNSS Support: GPS + SBAS + Galileo + QZSS + GLONASS, GPS version only\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Note About Flight Time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe manufacturer-stated hover time is measured under controlled hover conditions and should not be understood as normal freestyle or cinematic flight time.\u003c\/p\u003e\n\u003cp\u003eActual flight time depends on battery, throttle use, wind, action-camera weight, propellers, temperature, and pilot style.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBLITZ 5.8GHz 1.6W VTX Specifications\u003c\/h3\u003e\n\u003cp\u003eProduct Name: BLITZ 5.8GHz 1.6W VTX\u003c\/p\u003e\n\u003cp\u003eOutput Power: PIT \/ 25mW \/ 400mW \/ 800mW \/ 1600mW\u003c\/p\u003e\n\u003cp\u003eInput Voltage: 7–34V, 2–8S\u003c\/p\u003e\n\u003cp\u003eWorking Current at 25.2V:\u003c\/p\u003e\n\u003cp\u003ePIT: ≤20mA\u003c\/p\u003e\n\u003cp\u003e25mW: ≤65mA\u003c\/p\u003e\n\u003cp\u003e400mW: ≤130mA\u003c\/p\u003e\n\u003cp\u003e800mW: ≤150mA\u003c\/p\u003e\n\u003cp\u003e1600mW: ≤250mA\u003c\/p\u003e\n\u003cp\u003eTransmission Frequency: 40CH, A \/ B \/ E \/ F \/ R bands\u003c\/p\u003e\n\u003cp\u003eAntenna Interface: MMCX\u003c\/p\u003e\n\u003cp\u003eMounting Hole: 30.5 × 30.5mm \/ M3\u003c\/p\u003e\n\u003cp\u003eWeight: 18.9g, antenna not included\u003c\/p\u003e\n\u003cp\u003eDimensions: 38.5 × 38.5mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAnalog FPV Compatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnalog FPV goggles\u003c\/li\u003e\n\u003cli\u003eFPV goggles with compatible analog receiver module\u003c\/li\u003e\n\u003cli\u003eExternal analog video receiver systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot directly compatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Goggles 2\u003c\/li\u003e\n\u003cli\u003eDJI Goggles Integra\u003c\/li\u003e\n\u003cli\u003eDJI Goggles 3\u003c\/li\u003e\n\u003cli\u003eDJI Goggles N3\u003c\/li\u003e\n\u003cli\u003eWalksnail-only goggles\u003c\/li\u003e\n\u003cli\u003eHDZero-only goggles\u003c\/li\u003e\n\u003cli\u003eDJI, Walksnail, and HDZero are digital HD systems.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eAnalog VTX Range and Legal Notice\u003c\/h3\u003e\n\u003cp\u003eThe maximum analog video range depends on antenna setup, selected output power, channel, local interference, environment, and legal limits.\u003c\/p\u003e\n\u003cp\u003eAvailable VTX power levels, channels, and frequencies may be restricted by local regulations.\u003c\/p\u003e\n\u003cp\u003ePlease always follow the legal VTX frequency and output power limits in your country.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePacking List\u003c\/h3\u003e\n\u003cp\u003e1× Nazgul ECO XL5 V1.1 6S Analog BNF\u003c\/p\u003e\n\u003cp\u003e1× 5.8GHz SMA FPV Antenna\u003c\/p\u003e\n\u003cp\u003e1× Anti-Slip Battery Pad\u003c\/p\u003e\n\u003cp\u003e1× Battery Strap\u003c\/p\u003e\n\u003cp\u003e2× Nazgul F5 Propeller Pairs\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSetup Notes\u003c\/h3\u003e\n\u003cp\u003eThe drone is delivered with a factory-installed Betaflight preset. Before the first flight, no firmware update, no reset, and no Betaflight changes are required.\u003c\/p\u003e\n\u003cp\u003eBNF means the drone still needs to be bound to your compatible radio controller before flight.\u003c\/p\u003e\n\u003cp\u003eIf you selected the PNP \/ Without RX version, you must install and configure your own receiver before flight.\u003c\/p\u003e\n\u003cp\u003eCheck the analog video channel and VTX output power before flying.\u003c\/p\u003e\n\u003cp\u003eSet the correct VTX power according to your local regulations.\u003c\/p\u003e\n\u003cp\u003eGPS Rescue is not enabled by default. If your version includes GPS, it must be configured, checked, and tested by the pilot before use.\u003c\/p\u003e\n\u003cp\u003eWe strongly recommend not flashing firmware, not resetting Betaflight, and not applying random presets unless you have saved a backup and know exactly which target and configuration are required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eImportant Note – Analog Video Signal\u003c\/h3\u003e\n\u003cp\u003eThis is an analog FPV drone.\u003c\/p\u003e\n\u003cp\u003eIf you do not see video in your goggles, check that your goggles or receiver are set to the same band and channel as the drone’s VTX.\u003c\/p\u003e\n\u003cp\u003eAlso check that the VTX is powered correctly, that the antenna is installed before powering the drone, and that the selected VTX power and channel are allowed in your region.\u003c\/p\u003e\n\u003cp\u003eNever power an analog VTX for a longer time without an antenna installed, as this can damage the VTX.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eChangelog\u003c\/h3\u003e\n\u003cp\u003eJune 28, 2024: Battery plug updated to fixed form. Drone upgraded to V1.1.\u003c\/p\u003e\n\u003cp\u003eSeptember 10, 2024: Side panels installed by default.\u003c\/p\u003e\n\u003cp\u003eOctober 21, 2025: Flight stack changed from BLITZ ATF435 Stack with E55S 4-IN-1 ESC to BLITZ F7 Stack with E55 4-IN-1 ESC.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does BNF mean?\u003c\/strong\u003e\u003cbr\u003eBNF means Bind-and-Fly. The drone is assembled and factory configured, but it still needs to be bound to your compatible radio controller before flight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a complete Ready-to-Fly set?\u003c\/strong\u003e\u003cbr\u003eNo. This is only the BNF drone. Battery, charger, FPV goggles, radio controller, and action camera are not included.\u003c\/p\u003e\n\u003cp\u003eIf you need a complete setup, please check our ReadyFly Kits or compatible accessory bundles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich receiver version should I choose?\u003c\/strong\u003e\u003cbr\u003eChoose the version that matches your radio controller.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse ELRS 2.4GHz for iFlight Commando 8 or Commando 14 ELRS 2.4GHz.\u003c\/li\u003e\n\u003cli\u003eUse ELRS 868\/915MHz only for suitable ELRS 868\/915MHz radios or modules.\u003c\/li\u003e\n\u003cli\u003eUse TBS Crossfire if you fly with Crossfire.\u003c\/li\u003e\n\u003cli\u003eChoose PNP \/ Without RX only if you want to install and configure your own receiver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIs this drone compatible with DJI goggles?\u003c\/strong\u003e\u003cbr\u003eNo, not directly. This is an analog FPV drone. DJI goggles are designed for DJI digital systems and do not receive analog video without additional compatible analog receiver hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this drone compatible with HDZero or Walksnail goggles?\u003c\/strong\u003e\u003cbr\u003eNot directly. This drone uses analog 5.8GHz video transmission and requires analog video reception.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the drone delivered preconfigured?\u003c\/strong\u003e\u003cbr\u003eYes. The drone is delivered with a factory-installed Betaflight preset. Before the first flight, no firmware update, no Betaflight reset, and no configuration change is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs GPS included?\u003c\/strong\u003e\u003cbr\u003eGPS depends on the selected variant. The XL5 is available as No GPS or GPS Pre-Installed version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan GPS be installed later?\u003c\/strong\u003e\u003cbr\u003eYes. The rear GPS mounting position is prepared. To install GPS later, the customer needs a compatible GPS module, suitable TPU holder, wiring, tools, and the technical knowledge to connect the GPS to the flight controller and configure it in Betaflight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs GPS Rescue enabled by default?\u003c\/strong\u003e\u003cbr\u003eNo. GPS Rescue is not enabled by default. If your version includes GPS, it must be configured, checked, and tested by the pilot before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use Li-Ion batteries?\u003c\/strong\u003e\u003cbr\u003eYes, but only for smooth cruising and endurance-oriented flying. Li-Ion batteries are not suitable for aggressive freestyle, racing, repeated punch-outs, or high-current flying. Voltage warnings may need adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a GoPro or action camera?\u003c\/strong\u003e\u003cbr\u003eYes. The frame has a front mounting position for a GoPro or similar action camera when a compatible mount is used. Additional payload increases weight and usually reduces flight time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fly in rain or wet conditions?\u003c\/strong\u003e\u003cbr\u003eNo. Do not fly in rain, snow, wet grass, fog, or high humidity. Damage caused by water or moisture is not considered a normal manufacturing defect.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSafety Notice\u003c\/h3\u003e\n\u003cp\u003eFPV drones are high-performance aircraft and must be operated responsibly.\u003c\/p\u003e\n\u003cp\u003eAlways follow local laws and regulations.\u003c\/p\u003e\n\u003cp\u003eRemove the propellers before configuration, receiver testing, firmware work, or motor testing on the bench.\u003c\/p\u003e\n\u003cp\u003eAlways inspect the drone before every flight.\u003c\/p\u003e\n\u003cp\u003eDo not fly with damaged propellers, loose screws, damaged antennas, damaged batteries, or visible electronic damage.\u003c\/p\u003e\n\u003cp\u003eCrash damage, water damage, incorrect firmware flashing, wrong Betaflight configuration, incorrect wiring, incorrect receiver setup, incorrect battery use, or unsafe operation are not considered normal manufacturing defects.\u003c\/p\u003e\n\u003cp\u003eBy purchasing and using this product, the user accepts responsibility for safe setup, safe operation, legal compliance, maintenance, and risk management.\u003cbr\u003e\u003c\/p\u003e","brand":"iFlight","offers":[{"title":"Without RX (PNP) \/ No GPS","offer_id":45452234981641,"sku":"F016801","price":262.11,"currency_code":"EUR","in_stock":true},{"title":"Without RX (PNP) \/ Pre-installed GPS","offer_id":45452252676361,"sku":"F017360","price":306.76,"currency_code":"EUR","in_stock":true},{"title":"TBS Crossfire NANO RX \/ No GPS","offer_id":45452235014409,"sku":"F016802","price":295.36,"currency_code":"EUR","in_stock":true},{"title":"TBS Crossfire NANO RX \/ Pre-installed GPS","offer_id":45452252709129,"sku":"F017361","price":340.01,"currency_code":"EUR","in_stock":true},{"title":"ELRS 2.4GHz RX \/ No GPS","offer_id":45452235079945,"sku":"F016803","price":280.16,"currency_code":"EUR","in_stock":true},{"title":"ELRS 2.4GHz RX \/ Pre-installed GPS","offer_id":45452252774665,"sku":"F017362","price":324.81,"currency_code":"EUR","in_stock":true},{"title":"ELRS 868\/915MHz RX \/ No GPS","offer_id":45452235047177,"sku":"F016804","price":280.16,"currency_code":"EUR","in_stock":true},{"title":"ELRS 868\/915MHz RX \/ Pre-installed GPS","offer_id":45452252741897,"sku":"F017363","price":324.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/0527\/9753\/files\/nazgul-xl5-eco-6s-analog-220562.png?v=1727359881"},{"product_id":"nazgul-dc5-o4-eco-v1-1-6s-hd","title":"Nazgul DC5 O4 ECO V1.1 6S HD","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe Nazgul DC5 ECO O4 is a lightweight 5-inch DeadCat FPV drone designed for pilots who want a clean HD view, DJI O4 image quality, and a more affordable alternative to premium Evoque models.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIts DeadCat geometry helps keep propellers out of the camera view, making it especially practical for cinematic freestyle, smooth cruising, action-camera footage, and general HD FPV flying. The frame combines carbon fiber with an aluminum camera mount, while the integrated Anti-Spark Filter, built-in buzzer, receiver mounting area, and DJI O4 Air Unit Pro make it a clean and practical BNF platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompared with the Nazgul Evoque F5 V3 O4, the DC5 ECO is the lighter and more affordable DeadCat option. The F5 V3 remains the premium model with Evoque side panels, switchable DeadCat \/ True X configuration, and higher-end frame design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003ch3 class=\"isSelectedEnd\"\u003eHighlights\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eLightweight and Durable\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eThe Nazgul DC5 ECO combines a carbon fiber frame with an aluminum camera mount, creating a lightweight yet robust platform for HD FPV flying. Its DeadCat geometry helps reduce propellers in view, making it well suited for clean DJI O4 footage, cinematic flying, and action-camera use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eAnti-Spark Filter\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eConnecting a high-voltage LiPo battery can create a visible spark at the XT60 connector, caused by the initial current rush into the ESC and capacitor system. The integrated Anti-Spark Filter helps reduce plug-in spark, protects the connector from unnecessary wear, and helps reduce sudden voltage and current spikes during battery connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eDJI O4 Air Unit Pro Low-Latency Digital Transmission\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eThe DJI O4 Air Unit Pro provides a clear, low-latency digital FPV feed with up to 1080p\/100fps live view, depending on goggles, region, environment, and local regulations. It is designed for a crisp real-time image in the goggles, even in challenging RF conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe O4 Air Unit Pro also supports onboard recording up to 4K\/120fps, giving pilots high-quality footage directly from the air unit without requiring an additional HD camera for every flight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e4K Stabilized Video with 155° Ultra-Wide Angle\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eWith its 1\/1.3-inch image sensor, 155° ultra-wide field of view, and support for RockSteady stabilization or gyro data for Gyroflow, the DJI O4 Air Unit Pro delivers high-quality onboard footage for freestyle, cinematic, and cruising flights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eND Filter Support\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eCompatible ND filters can be used to better control exposure, shutter speed, and motion blur in bright conditions. Please use ND filters designed for the iFlight O4 Air Unit Pro setup, as DJI original O4 Pro filters may not fit this drone design correctly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003ePractical Maintenance Features\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eThe DC5 ECO is equipped with a built-in buzzer and a dedicated receiver mounting area, making setup, maintenance, and receiver access easier and cleaner.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eFlexible Build Layout\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eThe frame provides standard 20×20mm and 30.5×30.5mm mounting options, offering flexibility for maintenance, repairs, and future customization. This makes the platform easier to service and compatible with many common FPV electronics layouts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"4206\" data-end=\"4241\"\u003e\u003cstrong\u003ePre-Installed BLITZ Mini M10 GPS V2\u003c\/strong\u003e\u003cbr\u003eGPS can support positioning, telemetry, and Betaflight GPS Rescue when correctly configured and tested by the pilot. GPS Rescue is not enabled by default and should not be treated as a replacement for safe piloting, a strong radio link, and proper failsafe setup.\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003ch3 data-end=\"4008\" data-start=\"3991\"\u003eBNF Factory Setup\u003c\/h3\u003e\n\u003cp data-end=\"4008\" data-start=\"3991\"\u003eThis drone is delivered as a BNF, which means Bind-and-Fly.\u003c\/p\u003e\n\u003cp data-end=\"4243\" data-start=\"4071\"\u003eIt comes assembled and factory configured with a Betaflight preset already installed. No firmware update, reset, or Betaflight changes are required before the first flight.\u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"4442\" data-start=\"4245\"\u003eThe drone still needs to be bound to a compatible radio controller before flying. Angle Mode is enabled by default to make first flights safer and reduce the risk of accidents during initial setup.\u003c\/p\u003e\n\u003cp data-end=\"1012\" data-start=\"969\"\u003e \u003c\/p\u003e\n\u003ch3 data-end=\"1012\" data-start=\"969\"\u003eReadyFly Kits – Complete FPV Sets Available\u003c\/h3\u003e\n\u003cp data-end=\"1050\" data-start=\"1014\"\u003eThis product is sold as a BNF drone.\u003c\/p\u003e\n\u003cp data-end=\"1235\" data-start=\"1052\"\u003eBNF means Bind-and-Fly: the drone is assembled, tuned, and equipped with the selected receiver\/video system, but it must still be bound to a compatible radio controller before flying.\u003c\/p\u003e\n\u003cp data-end=\"1450\" data-start=\"1237\"\u003eIf you need a complete FPV setup, we also offer \u003ca rel=\"noopener\" href=\"https:\/\/iflight-rc.eu\/collections\/readyfly-combos\" target=\"_blank\"\u003eReadyFly\u003c\/a\u003e kits in our shop. Our ReadyFly kits allow you to mix and match compatible components such as goggles, radio controller, batteries, charger, and accessories.\u003c\/p\u003e\n\u003cp data-end=\"1515\" data-start=\"1452\"\u003eChoose this BNF drone if you already have compatible equipment.\u003c\/p\u003e\n\u003cp data-end=\"1620\" data-start=\"1517\"\u003eChoose a ReadyFly kit if you want a more complete FPV setup with the main components selected together.\u003c\/p\u003e\n\u003cp data-end=\"2163\" data-start=\"2148\"\u003e \u003c\/p\u003e\n\u003ch3 data-end=\"2163\" data-start=\"2148\"\u003eRequired to Fly\u003c\/h3\u003e\n\u003cp data-end=\"2214\" data-start=\"2165\"\u003eThis is a BNF drone, not a complete ReadyFly kit.\u003c\/p\u003e\n\u003cp data-end=\"2231\" data-start=\"2216\"\u003eYou still need:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"2255\" data-start=\"2233\"\u003eCompatible FPV goggles\u003c\/li\u003e\n\u003cli data-end=\"2323\" data-start=\"2257\"\u003eCompatible radio controller matching the selected receiver version\u003c\/li\u003e\n\u003cli data-end=\"2344\" data-start=\"2325\"\u003eSuitable 6S battery\u003c\/li\u003e\n\u003cli data-end=\"2387\" data-start=\"2346\"\u003e6S-compatible LiPo\/Li-Ion balance charger\u003c\/li\u003e\n\u003cli data-end=\"2436\" data-start=\"2389\"\u003emicroSD card for onboard recording, if required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2470\" data-start=\"2438\"\u003eNot included with the BNF drone:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"2479\" data-start=\"2472\"\u003eBattery\u003c\/li\u003e\n\u003cli data-end=\"2488\" data-start=\"2481\"\u003eCharger\u003c\/li\u003e\n\u003cli data-end=\"2497\" data-start=\"2490\"\u003eGoggles\u003c\/li\u003e\n\u003cli data-end=\"2515\" data-start=\"2499\"\u003eRadio controller\u003c\/li\u003e\n\u003cli data-end=\"2529\" data-start=\"2517\"\u003emicroSD card\u003c\/li\u003e\n\u003cli data-end=\"2544\" data-start=\"2531\"\u003eAction camera\u003c\/li\u003e\n\u003cli data-end=\"2581\" data-start=\"2546\"\u003eChoose the Correct Receiver Version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2653\" data-start=\"2583\"\u003ePlease choose the receiver version that matches your radio controller.\u003c\/p\u003e\n\u003cp data-end=\"2683\" data-start=\"2655\"\u003e \u003c\/p\u003e\n\u003ch3 data-end=\"2683\" data-start=\"2655\"\u003eAvailable receiver versions:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"2714\" data-start=\"2685\"\u003eDJI FPV Remote Controller 2\/3\u003c\/li\u003e\n\u003cli data-end=\"2737\" data-start=\"2716\"\u003eTBS Crossfire Nano RX\u003c\/li\u003e\n\u003cli data-end=\"2761\" data-start=\"2739\"\u003eiFlight ELRS 2.4GHz RX\u003c\/li\u003e\n\u003cli data-end=\"2789\" data-start=\"2763\"\u003eiFlight ELRS 868\/915MHz RX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2931\" data-start=\"2791\"\u003eThe DJI O4 Air Unit Pro handles the video link. The selected receiver\/control version determines how the drone receives radio-control input.\u003c\/p\u003e\n\u003cp data-end=\"2955\" data-start=\"2933\"\u003e\u003cstrong\u003eDJI Controller Version\u003cbr\u003e\u003c\/strong\u003eChoose the DJI version if you want to control the drone with DJI FPV Remote Controller 2 or DJI FPV Remote Controller 3.\u003cbr\u003eThis version is configured for DJI SBUS control. Additional SBUS and GND wires are connected to the flight controller for DJI remote-control input.\u003c\/p\u003e\n\u003cp data-end=\"3500\" data-start=\"3228\"\u003eImportant: The DJI Controller version is intended for DJI remote control use. To use ELRS or TBS Crossfire instead, a separate receiver must be installed and correctly configured. This may require disconnecting the DJI SBUS wiring or using another UART for receiver input.\u003c\/p\u003e\n\u003cp data-end=\"3521\" data-start=\"3502\"\u003e\u003cstrong\u003eELRS 2.4GHz Version\u003cbr\u003e\u003c\/strong\u003eChoose this version if you use an ELRS 2.4GHz radio, such as an iFlight Commando 8 or Commando 14 ELRS 2.4GHz.\u003c\/p\u003e\n\u003cp data-end=\"3658\" data-start=\"3635\"\u003e\u003cstrong\u003eELRS 868\/915MHz Version\u003cbr\u003e\u003c\/strong\u003eChoose this version only if your radio or module supports ELRS 868\/915MHz.\u003cbr\u003eELRS 2.4GHz and ELRS 868\/915MHz are not compatible with each other.\u003c\/p\u003e\n\u003cp data-end=\"3826\" data-start=\"3805\"\u003e\u003cstrong\u003eTBS Crossfire Version\u003cbr\u003e\u003c\/strong\u003eChoose this version if you use a TBS Crossfire radio or module.\u003cbr\u003eIf you are unsure which version fits your radio, contact us before ordering.\u003c\/p\u003e\n\u003cp data-end=\"3994\" data-start=\"3971\"\u003e \u003c\/p\u003e\n\u003ch3 data-end=\"3994\" data-start=\"3971\"\u003eBattery Recommendations\u003c\/h3\u003e\n\u003cp data-end=\"4036\" data-start=\"3996\"\u003eThis drone is designed for 6S batteries.\u003c\/p\u003e\n\u003cp data-end=\"4092\" data-start=\"4038\"\u003eMost pilots use batteries between 1380mAh and 2400mAh.\u003c\/p\u003e\n\u003cp data-end=\"4124\" data-start=\"4094\"\u003e\u003cstrong\u003eFreestyle \/ responsive flying:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"4161\" data-start=\"4126\"\u003e6S 1380–1550mAh high-discharge LiPo\u003c\/li\u003e\n\u003cli data-end=\"4188\" data-start=\"4163\"\u003eCinematic \/ GoPro flying:\u003c\/li\u003e\n\u003cli data-end=\"4225\" data-start=\"4190\"\u003e6S 1550–1850mAh high-discharge LiPo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"4243\" data-start=\"4227\"\u003e\u003cstrong\u003eLonger cruising:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"4280\" data-start=\"4245\"\u003e6S 1850–2400mAh high-discharge LiPo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"4323\" data-start=\"4282\"\u003eMaximum endurance \/ smooth cruising only:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"4351\" data-start=\"4325\"\u003eDOGCOM 6S1P 4000mAh Li-Ion\u003c\/li\u003e\n\u003cli data-end=\"4379\" data-start=\"4353\"\u003eDOGCOM 6S1P 5000mAh Li-Ion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"4403\" data-start=\"4381\"\u003e\u003cstrong\u003eImportant Li-Ion note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"4593\" data-start=\"4405\"\u003eLi-Ion batteries are only recommended for smooth cruising and endurance-focused flying. They are not suitable for aggressive freestyle, racing, repeated punch-outs, or high-current flying.\u003c\/p\u003e\n\u003cp data-end=\"4704\" data-start=\"4595\"\u003eLi-Ion batteries behave differently from LiPo batteries and may require adjusted Betaflight voltage warnings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAction Camera Support\u003c\/h3\u003e\n\u003cp\u003eThe DC5 ECO frame can be used with compatible action-camera TPU mounts.\u003c\/p\u003e\n\u003cp\u003eA GoPro-style action camera can be mounted for cinematic footage, but the final flight feel and flight time depend heavily on battery size, camera weight, propeller choice, and flying style.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eRecommended Accessories:\u003c\/h3\u003e\n\u003cp\u003eDefault Propeller: \u003ca href=\"https:\/\/iflight-rc.eu\/products\/nazgul-f5-tri-blade-prop\"\u003eNazgul F5 Tri-blade Prop\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOptional Propeller: \u003ca href=\"https:\/\/iflight-rc.eu\/products\/gemfan-hurricane-max-51377-3-prop-for-nazgul?_pos=4\u0026amp;_fid=9d0f6a481\u0026amp;_ss=c\"\u003eGEMFAN Hurricane MAX 51377 Prop (for Nazgul)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFreestyle: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/dogcom-6s-1550mah-150c-ultra-series-battery?_pos=1\u0026amp;_fid=c5f355a48\u0026amp;_ss=c\"\u003eDOGCOM 6S 1550mAh 150C Ultra Series Battery\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCinematic: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/dogcom-6s-1850mah-150c-battery?_pos=6\u0026amp;_fid=c5f355a48\u0026amp;_ss=c\"\u003eDOGCOM 6S 1850mAh 150C Battery\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLong Range: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/dogcom-6s-2200mah-150c-battery?_pos=5\u0026amp;_fid=c5f355a48\u0026amp;_ss=c\"\u003eDOGCOM 6S 2200mAh 150C Battery\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eMax. Range: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/dogcom-6s1p-5000mah-li-ion-battery?_pos=1\u0026amp;_fid=9c29bbd4c\u0026amp;_ss=c\"\u003eDOGCOM 6S1P 5000mAh Li-Ion Battery\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCharger: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/hota-d6-pro-charger?_pos=1\u0026amp;_sid=05ee51ec8\u0026amp;_ss=r\"\u003eHOTA D6 Pro 650W 1-6S Dual Channel AC\/DC Smart Charger\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eGoPro Mount: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/2raw-slim-gopro-tpu-mount?_pos=2\u0026amp;_sid=a7a036d6d\u0026amp;_ss=r\"\u003e2RAW Slim GoPro TPU Mount\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eTPU 3D Prints: \u003ca href=\"https:\/\/iflight-rc.eu\/products\/dc5-dc5-eco-tpu-3d-prints?variant=48432515907849\"\u003eDC5 \/ XL5 TPU 3D Prints\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003eProduct Name: Nazgul DC5 ECO V1.1 6S O4 HD BNF\u003c\/p\u003e\n\u003cp\u003eGeometry: DC \/ DeadCat\u003c\/p\u003e\n\u003cp\u003eFrame Wheelbase: 240mm\u003c\/p\u003e\n\u003cp\u003eFlight Controller: BLITZ F7 Flight Controller\u003c\/p\u003e\n\u003cp\u003eESC: BLITZ E55 4-IN-1 ESC\u003c\/p\u003e\n\u003cp\u003eVideo System: DJI O4 Air Unit Pro\u003c\/p\u003e\n\u003cp\u003eMotor: XING-E Pro 2207 1800KV\u003c\/p\u003e\n\u003cp\u003ePropellers: Nazgul F5 Tri-Blade Propellers\u003c\/p\u003e\n\u003cp\u003eRecommended Battery: 6S LiPo\u003c\/p\u003e\n\u003cp\u003eWeight: approx. 450g ±5g without battery, manufacturer-stated\u003c\/p\u003e\n\u003cp\u003eTakeoff Weight: approx. 675g ±5g with 6S 1480mAh battery, manufacturer-stated\u003c\/p\u003e\n\u003cp\u003eDimensions: approx. 193 × 144 × 34mm\u003c\/p\u003e\n\u003cp\u003eMaximum Speed: up to 190km\/h in Manual Mode, manufacturer-stated\u003c\/p\u003e\n\u003cp\u003eMaximum Takeoff Altitude: 7000m, manufacturer-stated\u003c\/p\u003e\n\u003cp\u003eMaximum Hover Time: approx. 11.5 minutes with 6S 1550mAh battery, manufacturer-stated hover value\u003c\/p\u003e\n\u003cp\u003eMaximum Wind Resistance: Level 7, manufacturer-stated\u003c\/p\u003e\n\u003cp\u003eOperating Temperature: -10°C to 40°C\u003c\/p\u003e\n\u003cp\u003eAntennas: Albatross V2 5.8GHz dual antennas\u003c\/p\u003e\n\u003cp\u003eGPS: optional, depending on selected version\u003c\/p\u003e\n\u003cp\u003eGNSS: GPS + SBAS + Galileo + QZSS + GLONASS, GPS version only\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Note About Flight Time\u003c\/strong\u003e\u003cbr\u003eManufacturer hover time is measured under controlled hover conditions and should not be understood as normal freestyle or cinematic flight time. Real flight time depends on battery, throttle use, wind, action-camera weight, propellers, temperature, and pilot style.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDJI O4 Air Unit Pro Specifications\u003c\/h3\u003e\n\u003cp\u003eProduct Name: DJI O4 Air Unit Pro\u003c\/p\u003e\n\u003cp\u003eImage Sensor: 1\/1.3-inch\u003c\/p\u003e\n\u003cp\u003eLens Field of View: 155°\u003c\/p\u003e\n\u003cp\u003eISO Range: 100–25600\u003c\/p\u003e\n\u003cp\u003eOnboard Video Recording: up to 4K\/120fps\u003c\/p\u003e\n\u003cp\u003eVideo Format: MP4\u003c\/p\u003e\n\u003cp\u003eMaximum Video Bitrate: 130Mbps\u003c\/p\u003e\n\u003cp\u003eColor Mode: Standard \/ D-Log M\u003c\/p\u003e\n\u003cp\u003eStabilization: RockSteady 3.0+ \/ stabilization off for Gyroflow use\u003c\/p\u003e\n\u003cp\u003eLive View Quality: up to 1080p\/100fps\u003c\/p\u003e\n\u003cp\u003eOperating Frequency: 5.170–5.250GHz and 5.725–5.850GHz, region dependent\u003c\/p\u003e\n\u003cp\u003eCommunication Bandwidth: up to 60MHz\u003c\/p\u003e\n\u003cp\u003eAntenna: dual antennas\u003c\/p\u003e\n\u003cp\u003eInternal Storage: 4GB\u003c\/p\u003e\n\u003cp\u003eSupported microSD Card: up to 512GB\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDJI O4 Compatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Goggles 3\u003c\/li\u003e\n\u003cli\u003eDJI Goggles N3\u003c\/li\u003e\n\u003cli\u003eDJI Goggles 2\u003c\/li\u003e\n\u003cli\u003eDJI Goggles Integra\u003c\/li\u003e\n\u003cli\u003eDJI FPV Remote Controller 3, when using DJI control version\u003c\/li\u003e\n\u003cli\u003eDJI FPV Remote Controller 2, when using DJI control version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther radios can be used only if they match the installed receiver version, such as ELRS or Crossfire.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eVideo Transmission Range\u003c\/h3\u003e\n\u003cp\u003eThe maximum video transmission range depends on goggles, region, environment, antenna positioning, interference, and local regulations.\u003c\/p\u003e\n\u003cp\u003eManufacturer-stated reference values may differ between FCC, CE, and SRRC regions. In Europe, CE limits apply.\u003c\/p\u003e\n\u003cp\u003eDo not treat maximum transmission range as a guaranteed flight distance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCompatibility Notes\u003c\/h3\u003e\n\u003cp\u003eThis is a DJI O4 drone. It is not the same as an analog, DJI O3, Walksnail, or HDZero drone.\u003c\/p\u003e\n\u003cp\u003eThe DJI O4 Air Unit Pro handles the video link. The receiver or DJI control configuration handles radio control.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDifferent receiver versions are wired and configured differently. Choose the version that matches your radio controller.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePacking List\u003c\/h3\u003e\n\u003cp\u003e1 x Nazgul DC5 ECO V1.1 6S O4 HD BNF\u003c\/p\u003e\n\u003cp\u003e2 x Antennas\u003c\/p\u003e\n\u003cp\u003e1 x Battery Pad\u003c\/p\u003e\n\u003cp\u003e2 x Propeller Pairs\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-start=\"7646\" data-end=\"7657\"\u003eSetup Notes\u003c\/h3\u003e\n\u003col\u003e\n\u003cli data-start=\"7659\" data-end=\"7806\"\u003eThe drone comes with a factory Betaflight preset installed. No firmware update, reset, or Betaflight changes are necessary before the first flight.\u003c\/li\u003e\n\u003cli data-start=\"7808\" data-end=\"7898\"\u003eBNF means the drone must still be bound to your compatible radio controller before flying.\u003c\/li\u003e\n\u003cli data-start=\"7900\" data-end=\"8015\"\u003eAngle Mode is enabled by default to make first flights safer and reduce the risk of accidents during initial setup.\u003c\/li\u003e\n\u003cli data-start=\"8017\" data-end=\"8122\"\u003eGPS Rescue is not enabled by default. It must be configured, checked, and tested by the pilot before use.\u003c\/li\u003e\n\u003cli data-start=\"8124\" data-end=\"8310\"\u003eWe strongly recommend not flashing firmware, resetting Betaflight, or applying random presets unless you have saved a backup and know exactly which target and configuration are required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-start=\"8787\" data-end=\"8790\"\u003eFAQ\u003c\/h3\u003e\n\u003cp data-start=\"8792\" data-end=\"8811\"\u003e\u003cstrong\u003eWhat does BNF mean?\u003cbr\u003e\u003c\/strong\u003eBNF means Bind-and-Fly. The drone is assembled and factory configured, but it must still be bound to your compatible radio controller before flying.\u003c\/p\u003e\n\u003cp data-start=\"8963\" data-end=\"8999\"\u003e\u003cstrong\u003eIs this a complete ready-to-fly set?\u003cbr\u003e\u003c\/strong\u003eNo. This is the BNF drone only. Battery, charger, goggles, radio controller, microSD card, and action camera are not included.\u003c\/p\u003e\n\u003cp data-start=\"9129\" data-end=\"9244\"\u003eIf you need a complete setup, please check our ReadyFly kits, where compatible components can be selected together.\u003c\/p\u003e\n\u003cp data-start=\"9246\" data-end=\"9285\"\u003e\u003cstrong\u003eWhich receiver version should I choose?\u003cbr\u003e\u003c\/strong\u003eChoose the version that matches your radio controller.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"9343\" data-end=\"9388\"\u003eUse DJI for DJI FPV Remote Controller 2 or 3.\u003c\/li\u003e\n\u003cli data-start=\"9390\" data-end=\"9456\"\u003eUse ELRS 2.4GHz for iFlight Commando 8 or Commando 14 ELRS 2.4GHz.\u003c\/li\u003e\n\u003cli data-start=\"9458\" data-end=\"9530\"\u003eUse ELRS 868\/900MHz only for matching ELRS 868\/900MHz radios or modules.\u003c\/li\u003e\n\u003cli data-start=\"9532\" data-end=\"9576\"\u003eUse TBS Crossfire if you fly with Crossfire.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"9578\" data-end=\"9612\"\u003e\u003cstrong\u003eDoes the drone come preconfigured?\u003cbr\u003e\u003c\/strong\u003eYes. The drone comes with a factory Betaflight preset installed. No firmware update, Betaflight reset, or configuration change is necessary before the first flight.\u003c\/p\u003e\n\u003cp data-start=\"9780\" data-end=\"9802\"\u003e\u003cstrong\u003eIs Angle Mode enabled?\u003cbr\u003e\u003c\/strong\u003eYes. Angle Mode is enabled by default to make first flights safer and reduce the risk of accidents during initial setup.\u003c\/p\u003e\n\u003cp data-start=\"9926\" data-end=\"9959\"\u003e\u003cstrong\u003eIs GPS Rescue enabled by default?\u003cbr\u003e\u003c\/strong\u003eNo. GPS Rescue is not enabled by default. It must be configured, checked, and tested by the pilot before use.\u003c\/p\u003e\n\u003cp data-start=\"10320\" data-end=\"10355\"\u003e\u003cstrong\u003eCan I use a GoPro or action camera?\u003cbr\u003e\u003c\/strong\u003eYes. The frame has a front mounting position for a GoPro or similar action camera when used with a compatible mount. Additional payload increases weight and usually reduces flight time.\u003c\/p\u003e\n\u003cp data-start=\"10544\" data-end=\"10580\"\u003e\u003cstrong\u003eCan I fly in rain or wet conditions?\u003cbr\u003e\u003c\/strong\u003eNo. Do not fly in rain, snow, wet grass, fog, or high moisture conditions. Water or moisture damage is not considered a normal manufacturing defect.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eSafety Disclaimer\u003c\/h3\u003e\n\u003cp\u003eFPV drones are high-performance radio-controlled aircraft and are not toys.\u003c\/p\u003e\n\u003cp\u003eAlways follow local laws and regulations. Fly only in permitted areas, keep a safe distance from people, animals, roads, buildings, and airports, and never fly beyond your skill level.\u003c\/p\u003e\n\u003cp\u003eAlways remove propellers when configuring the drone on the bench.\u003c\/p\u003e\n\u003cp\u003eLiPo batteries can be dangerous if charged, stored, transported, or used incorrectly. Always use a suitable LiPo charger and follow battery safety rules.\u003c\/p\u003e","brand":"iFlight","offers":[{"title":"For DJI FPV Controller 2 \u0026 3 \/ GPS pre-installed","offer_id":48968425996553,"sku":"F017736","price":551.9,"currency_code":"EUR","in_stock":true},{"title":"TBS Crossfire NANO RX \/ GPS pre-installed","offer_id":48968426062089,"sku":"F017737","price":584.9,"currency_code":"EUR","in_stock":true},{"title":"ELRS 2.4GHz RX \/ GPS pre-installed","offer_id":48968426193161,"sku":"F017738","price":569.9,"currency_code":"EUR","in_stock":true},{"title":"ELRS 868\/915MHz RX \/ GPS pre-installed","offer_id":48968426127625,"sku":"F017739","price":569.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/0527\/9753\/files\/nazgul-dc5-o4-eco-v11-6s-hd-iflight-europe-8302133.png?v=1780322053"},{"product_id":"nazgul-dc5-eco-6s-wtfpv-no-vtx","title":"Nazgul DC5 ECO 6S WTFPV (no VTX)","description":"\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003cdiv class=\"temp-specs-td value\"\u003e\n\u003ch3\u003ePlease Note\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis product does not include a camera or video transmission (VTX) system. These components must be purchased and installed separately by the user. You can find the recommended RX and GPS in the product add-ons.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eCompatible with\u003c\/h3\u003e\n\u003cp\u003eDJI O4 Air Unit Pro HD system\u003c\/p\u003e\n\u003cp\u003eDJI O3 Air Unit HD system\u003c\/p\u003e\n\u003cp\u003eBLITZ 1.6W VTX\u003c\/p\u003e\n\u003cp\u003eBLITZ Whoop 1.6W VTX\u003c\/p\u003e\n\u003cp\u003eBLITZ Mini Force 600mW VTX\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eNazgul DC5 ECO – a 5-inch freestyle drone that redefines performance and value. Its carbon fiber frame with an aluminum camera mount ensures durability while remaining lightweight, and the included GoPro mount adds versatility. Powered by the ATF435 flight controller and BLITZ E55S ESC, it delivers reliable performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003ch3 class=\"temp-specs-td name\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"temp-specs-td value\"\u003e\n\u003cp\u003e\u003cb\u003eLightweight and Durable\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA combination of carbon fiber and aluminum ensures a lightweight yet robust structure for your camera equipment. Designed for clear video output without propellers obstructing the view, enhancing the aesthetic quality of your aerial footage.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAnti-Spark Filter\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003ePlugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEnhance user experience and streamline maintenance\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eEquipped with a built-in buzzer and receiver mount, this feature makes it convenient maintenance and adjustments to the receiver.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003ch3 class=\"temp-specs-td name\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"temp-specs-td value\"\u003e\n\u003cp\u003eProduct Name: Nazgul DC5 ECO WTFPV\u003c\/p\u003e\n\u003cp\u003eGeometry: DC (DeadCat)\u003c\/p\u003e\n\u003cp\u003eFC: BLITZ ATF435 Flight Controller\u003c\/p\u003e\n\u003cp\u003eESC: BLITZ E55S 4-IN-1 ESC\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eVideo Transmission and Camera: None\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eFrame diagonal motor distance: 240mm\u003c\/p\u003e\n\u003cp\u003eMotor: XING-E Pro 2207 1800KV motors\u003c\/p\u003e\n\u003cp\u003eProp: Nazgul F5 propellers\u003c\/p\u003e\n\u003cp\u003eWeight: 418±5g\u003c\/p\u003e\n\u003cp\u003eTakeoff Weight: Approx. 643±5g (With 6S 1480mAh battery)\u003c\/p\u003e\n\u003cp\u003eDimensions (L×W×H): 193×144×34 mm\u003c\/p\u003e\n\u003cp\u003eMax Speed: 190 km\/h\u003c\/p\u003e\n\u003cp\u003eMaximum Takeoff Altitude: 7000 m\u003c\/p\u003e\n\u003cp\u003eMax Hover Time: Approx. 7.5 mins (No Load with 6S 1480mAh)\u003c\/p\u003e\n\u003cp\u003eMax Wind Speed Resistance: Level 7\u003c\/p\u003e\n\u003cp\u003eOperating Temperature Range: -10° to 40° C (14° to 104° F)\u003c\/p\u003e\n\u003cp\u003eAntennas: Dual Antenna\u003c\/p\u003e\n\u003cp\u003eGNSS: GPS+SBAS+Galileo+QZSS+Glonass (Optional)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003ch3 class=\"temp-specs-td name\"\u003ePacking List\u003c\/h3\u003e\n\u003cdiv class=\"temp-specs-td value\"\u003e\n\u003cp\u003e1 x Nazgul DC5 ECO V1.1 WTFPV\u003c\/p\u003e\n\u003cp\u003e2 x Antennas (and antenna cables)\u003c\/p\u003e\n\u003cp\u003e2 x Battery pads\u003c\/p\u003e\n\u003cp\u003e2 x Prop(Pairs)\u003c\/p\u003e\n\u003cp\u003e1 x Screw bag\u003c\/p\u003e\n\u003cp\u003e1 x Cable set\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003cdiv class=\"temp-specs-td name\"\u003e\n\u003ch3\u003ePlease Note:\u003c\/h3\u003e\n\u003cp\u003eThis product does not include a camera or video transmission (VTX) system. These components must be purchased and installed separately by the user. You can find the recommended RX and GPS in the product add-ons.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"iFlight","offers":[{"title":"No Receiver \/ No GPS","offer_id":55781611405577,"sku":"F018557","price":227.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/0527\/9753\/files\/nazgul-dc5-eco-6s-wtfpv-no-vtx-272047.png?v=1745518413"},{"product_id":"nazgul-evoque-f5-v3-o4-gps","title":"Nazgul Evoque F5 V3 O4 GPS","description":"\u003cdiv class=\"qMYqUG_convSearchResultHighlightRoot\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003csection class=\"text-token-text-primary w-full focus:outline-none has-data-writing-block:pointer-events-none [\u0026amp;:has([data-writing-block])\u0026gt;*]:pointer-events-auto R6Vx5W_threadScrollVars scroll-mb-[calc(var(--scroll-root-safe-area-inset-bottom,0px)+var(--thread-response-height))] scroll-mt-[calc(var(--header-height)+min(200px,max(70px,20svh)))]\" dir=\"auto\"\u003e\n\u003cdiv class=\"text-base my-auto mx-auto pb-10 [--thread-content-margin:var(--thread-content-margin-xs,calc(var(--spacing)*4))] @w-sm\/main:[--thread-content-margin:var(--thread-content-margin-sm,calc(var(--spacing)*6))] @w-lg\/main:[--thread-content-margin:var(--thread-content-margin-lg,calc(var(--spacing)*16))] px-(--thread-content-margin)\"\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\"\u003e\n\u003cdiv class=\"flex max-w-full flex-col gap-4 grow\"\u003e\n\u003cdiv dir=\"auto\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal outline-none keyboard-focused:focus-ring [.text-message+\u0026amp;]:mt-1\" tabindex=\"0\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden\"\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert wrap-break-word w-full dark markdown-new-styling\"\u003e\n\u003cp\u003eEvery upgrade of the Nazgul Evoque F5 V3 is designed to improve performance, durability, video quality, and versatility. With its switchable DeadCat \/ True X frame geometry, DJI O4 Air Unit Pro, upgraded Borg Mini stack with integrated anti-spark filter, refined cooling design, injection-molded protective parts, pre-installed GPS, and signature Evoque styling, the Evoque F5 V3 is built for pilots who want one powerful 5-inch platform for cinematic flying, freestyle, cruising, and action-camera use.\u003c\/p\u003e\n\u003cp\u003eAt the heart of the design is the flexible DC \/ X frame system. Use the DeadCat geometry for cleaner cinematic footage with reduced propeller view, or switch to True X geometry for a more symmetrical freestyle feel and dynamic handling.\u003c\/p\u003e\n\u003cp\u003eWhether you are capturing smooth HD footage, flying fast freestyle lines, carrying a GoPro, or building confidence with a factory-tuned BNF platform, the Nazgul Evoque F5 V3 offers a versatile flight experience with strong 6S performance and professional DJI O4 image quality.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 class=\"isSelectedEnd\"\u003e\u003cspan\u003eC4 Class UAS Version\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThis product is supplied by iFlight Europe \/ Patrionic GmbH as a C4 Class UAS certified configuration, covered by an EU-Type Examination Certificate for the Nazgul Evoque F5 V3.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDC \/ X Dual Geometry Flexible Switching\u003c\/strong\u003e\u003cbr\u003eThe switchable DeadCat \/ True X frame design gives the Evoque F5 V3 excellent flexibility for different flying styles.\u003c\/p\u003e\n\u003cp\u003eDeadCat geometry is ideal for cinematic footage with reduced propeller view, while True X geometry gives a more balanced and symmetrical feel for freestyle flying. This allows the same drone to adapt to cinematic flights, cruising, freestyle manoeuvres, and action-camera use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBorg Mini Stack – Improved Safety and Stability\u003c\/strong\u003e\u003cbr\u003eThe upgraded Borg Mini Stack combines the Borg Mini F7 flight controller with the Borg Mini 60A ESC for strong and reliable 6S performance.\u003c\/p\u003e\n\u003cp\u003eAn integrated anti-spark filter helps reduce connector stress when plugging in the battery, while the dual independent BEC power supply and built-in polymer capacitor improve electrical stability and help protect sensitive electronics from voltage spikes.\u003c\/p\u003e\n\u003cp\u003eWith up to 65A burst current capability, the stack is designed for demanding FPV flights while keeping the build compact, clean, and reliable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFront-Mounted DJI O4 Air Unit Pro Design\u003c\/strong\u003e\u003cbr\u003eThe upgraded front-mounted DJI O4 Air Unit Pro layout helps reduce interference and keeps the internal wiring cleaner and easier to maintain.\u003c\/p\u003e\n\u003cp\u003eThe improved assembly process reduces cable clutter and lowers the risk of issues caused by loose or tangled wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance-Focused Cooling Design\u003c\/strong\u003e\u003cbr\u003eThe refined Evoque shell design includes a fin-shaped cooling channel to improve airflow and heat dissipation.\u003c\/p\u003e\n\u003cp\u003eBetter cooling helps the electronics stay within a safer operating range during demanding flights, longer sessions, and warm-weather operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRefined Injection-Molded Construction\u003c\/strong\u003e\u003cbr\u003eThe Evoque F5 V3 upgrades many protective parts from traditional TPU-printed components to refined injection-molded parts.\u003c\/p\u003e\n\u003cp\u003eThis improves consistency, finish, material quality, and durability while giving the drone a cleaner premium appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI O4 Air Unit Pro – Flagship HD Recording\u003c\/strong\u003e\u003cbr\u003eEquipped with the DJI O4 Air Unit Pro, the Evoque F5 V3 delivers premium digital FPV video and onboard recording capability.\u003c\/p\u003e\n\u003cp\u003eThe 1\/1.3-inch image sensor provides excellent image quality, including improved performance in low-light conditions. With 4K onboard recording, ultra-wide 155° field of view, D-Log M support, and RockSteady 3.0+ stabilization, the O4 Air Unit Pro makes it possible to capture high-speed, low-altitude FPV footage with strong detail and immersive visual impact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-Installed BLITZ Mini M10 GPS V2\u003c\/strong\u003e\u003cbr\u003eThe Nazgul Evoque F5 V3 GPS version comes with a BLITZ Mini M10 GPS V2 pre-installed.\u003c\/p\u003e\n\u003cp\u003eGPS can support positioning, telemetry, and Betaflight GPS Rescue when correctly configured and tested by the pilot. GPS Rescue is not enabled by default and should not be treated as a replacement for safe piloting, a strong radio link, and proper failsafe setup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBNF Factory Setup\u003c\/h3\u003e\n\u003cp\u003eThis drone is delivered as a BNF, which means Bind-and-Fly.\u003c\/p\u003e\n\u003cp\u003eIt comes assembled and factory configured with a Betaflight preset already installed. No firmware update, reset, or Betaflight changes are required before the first flight.\u003c\/p\u003e\n\u003cp\u003eThe drone still needs to be bound to a compatible radio controller before flying. Angle Mode is enabled by default to make first flights safer and reduce the risk of accidents during initial setup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReadyFly Kits – Complete FPV Sets Available\u003c\/h3\u003e\n\u003cp\u003eThis product is sold as a BNF drone.\u003c\/p\u003e\n\u003cp\u003eBNF means Bind-and-Fly: the drone is assembled, tuned, and equipped with the selected receiver\/video system, but it must still be bound to a compatible radio controller before flying.\u003c\/p\u003e\n\u003cp\u003eIf you need a complete FPV setup, we also offer ReadyFly kits in our shop. Our ReadyFly kits allow you to mix and match compatible components such as goggles, radio controller, batteries, charger, and accessories.\u003c\/p\u003e\n\u003cp\u003eChoose this BNF drone if you already have compatible equipment.\u003c\/p\u003e\n\u003cp\u003eChoose a ReadyFly kit if you want a more complete FPV setup with the main components selected together.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eRequired to Fly\u003c\/h3\u003e\n\u003cp\u003eThis is a BNF drone, not a complete ReadyFly kit.\u003c\/p\u003e\n\u003cp\u003eYou still need:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible FPV goggles\u003c\/li\u003e\n\u003cli\u003eCompatible radio controller matching the selected receiver version\u003c\/li\u003e\n\u003cli\u003eSuitable 6S battery\u003c\/li\u003e\n\u003cli\u003e6S-compatible LiPo\/Li-Ion balance charger\u003c\/li\u003e\n\u003cli\u003emicroSD card for onboard recording, if required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included with the BNF drone:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBattery\u003c\/li\u003e\n\u003cli\u003eCharger\u003c\/li\u003e\n\u003cli\u003eGoggles\u003c\/li\u003e\n\u003cli\u003eRadio controller\u003c\/li\u003e\n\u003cli\u003emicroSD card\u003c\/li\u003e\n\u003cli\u003eAction camera\u003c\/li\u003e\n\u003cli\u003eChoose the Correct Receiver Version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease choose the receiver version that matches your radio controller.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAvailable receiver versions:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDJI FPV Remote Controller 2\/3\u003c\/li\u003e\n\u003cli\u003eTBS Crossfire Nano RX\u003c\/li\u003e\n\u003cli\u003eiFlight ELRS 2.4GHz RX\u003c\/li\u003e\n\u003cli\u003eiFlight ELRS 868\/915MHz RX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe DJI O4 Air Unit Pro handles the video link. The selected receiver\/control version determines how the drone receives radio-control input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDJI Controller Version\u003cbr\u003e\u003c\/strong\u003eChoose the DJI version if you want to control the drone with DJI FPV Remote Controller 2 or DJI FPV Remote Controller 3.\u003cbr\u003eThis version is configured for DJI SBUS control. Additional SBUS and GND wires are connected to the flight controller for DJI remote-control input.\u003c\/p\u003e\n\u003cp\u003eImportant: The DJI Controller version is intended for DJI remote control use. To use ELRS or TBS Crossfire instead, a separate receiver must be installed and correctly configured. This may require disconnecting the DJI SBUS wiring or using another UART for receiver input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELRS 2.4GHz Version\u003cbr\u003e\u003c\/strong\u003eChoose this version if you use an ELRS 2.4GHz radio, such as an iFlight Commando 8 or Commando 14 ELRS 2.4GHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eELRS 868\/915MHz Version\u003cbr\u003e\u003c\/strong\u003eChoose this version only if your radio or module supports ELRS 868\/915MHz.\u003cbr\u003eELRS 2.4GHz and ELRS 868\/915MHz are not compatible with each other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTBS Crossfire Version\u003cbr\u003e\u003c\/strong\u003eChoose this version if you use a TBS Crossfire radio or module.\u003cbr\u003eIf you are unsure which version fits your radio, contact us before ordering.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBattery Recommendations\u003c\/h3\u003e\n\u003cp\u003eThis drone is designed for 6S batteries.\u003c\/p\u003e\n\u003cp\u003eMost pilots use batteries between 1380mAh and 2400mAh.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFreestyle \/ responsive flying:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6S 1380–1550mAh high-discharge LiPo\u003c\/li\u003e\n\u003cli\u003eCinematic \/ GoPro flying:\u003c\/li\u003e\n\u003cli\u003e6S 1550–1850mAh high-discharge LiPo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLonger cruising:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6S 1850–2400mAh high-discharge LiPo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMaximum endurance \/ smooth cruising only:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDOGCOM 6S1P 4000mAh Li-Ion\u003c\/li\u003e\n\u003cli\u003eDOGCOM 6S1P 5000mAh Li-Ion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Li-Ion note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLi-Ion batteries are only recommended for smooth cruising and endurance-focused flying. They are not suitable for aggressive freestyle, racing, repeated punch-outs, or high-current flying.\u003c\/p\u003e\n\u003cp\u003eLi-Ion batteries behave differently from LiPo batteries and may require adjusted Betaflight voltage warnings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAction Camera Support\u003c\/h3\u003e\n\u003cp\u003eThe Nazgul Evoque F5 V3 has a front mounting position for a GoPro or similar action camera when used with a compatible mount.\u003c\/p\u003e\n\u003cp\u003eAdding an action camera increases takeoff weight, changes handling, increases current draw, and usually reduces flight time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eRecommended Accessories:\u003c\/h3\u003e\n\u003cp\u003eDefault Propeller: \u003ca href=\"https:\/\/iflight-rc.eu\/products\/nazgul-f5-tri-blade-prop\"\u003eNazgul F5 Tri-blade Prop\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOptional Propeller: \u003ca href=\"https:\/\/iflight-rc.eu\/products\/gemfan-hurricane-max-51377-3-prop-for-nazgul?_pos=4\u0026amp;_fid=9d0f6a481\u0026amp;_ss=c\"\u003eGEMFAN Hurricane MAX 51377 Prop (for Nazgul)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFreestyle: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/dogcom-6s-1550mah-150c-ultra-series-battery?_pos=1\u0026amp;_fid=c5f355a48\u0026amp;_ss=c\"\u003eDOGCOM 6S 1550mAh 150C Ultra Series Battery\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCinematic: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/dogcom-6s-1850mah-150c-battery?_pos=6\u0026amp;_fid=c5f355a48\u0026amp;_ss=c\"\u003eDOGCOM 6S 1850mAh 150C Battery\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLong Range: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/dogcom-6s-2200mah-150c-battery?_pos=5\u0026amp;_fid=c5f355a48\u0026amp;_ss=c\"\u003eDOGCOM 6S 2200mAh 150C Battery\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eMax. Range: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/dogcom-6s1p-5000mah-li-ion-battery?_pos=1\u0026amp;_fid=9c29bbd4c\u0026amp;_ss=c\"\u003eDOGCOM 6S1P 5000mAh Li-Ion Battery\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCharger: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/hota-d6-pro-charger?_pos=1\u0026amp;_sid=05ee51ec8\u0026amp;_ss=r\"\u003eHOTA D6 Pro 650W 1-6S Dual Channel AC\/DC Smart Charger\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eGoPro Mount: \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/2raw-slim-gopro-tpu-mount?_pos=2\u0026amp;_sid=a7a036d6d\u0026amp;_ss=r\"\u003e2RAW Slim GoPro TPU Mount\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003eProduct Name: Nazgul Evoque F5 V3 O4 GPS HD BNF\u003c\/p\u003e\n\u003cp\u003eProduct Type: 5-inch BNF FPV Drone\u003c\/p\u003e\n\u003cp\u003eRecommended Skill Level: Intermediate to Advanced FPV Pilots\u003c\/p\u003e\n\u003cp\u003eVideo System: DJI O4 Air Unit Pro\u003c\/p\u003e\n\u003cp\u003eReceiver Options: DJI FPV Remote Controller 2\/3, TBS Crossfire Nano RX, iFlight ELRS 2.4GHz RX, iFlight ELRS 868\/900MHz RX\u003c\/p\u003e\n\u003cp\u003eGeometry: DeadCat default \/ True X switchable\u003c\/p\u003e\n\u003cp\u003eFrame Diagonal Motor Distance: 236mm DeadCat default \/ 239mm True X\u003c\/p\u003e\n\u003cp\u003eFlight Controller: Borg Mini F7 Flight Controller V1.1\u003c\/p\u003e\n\u003cp\u003eESC: Borg Mini 60A ESC\u003c\/p\u003e\n\u003cp\u003eStack Features: Integrated anti-spark filter, dual independent BEC power supply, built-in polymer capacitor\u003c\/p\u003e\n\u003cp\u003eBurst Current: Up to 65A per channel\u003c\/p\u003e\n\u003cp\u003eMotor: XING2 2207 1750KV\u003c\/p\u003e\n\u003cp\u003ePropellers: Nazgul F5 propellers\u003c\/p\u003e\n\u003cp\u003eBattery Input: 6S\u003c\/p\u003e\n\u003cp\u003eRecommended Battery Type: 6S LiPo\u003c\/p\u003e\n\u003cp\u003eCommon LiPo Battery Range: 1380mAh–2400mAh\u003c\/p\u003e\n\u003cp\u003eLi-Ion Compatibility: 6S1P 4000mAh \/ 5000mAh Li-Ion for smooth cruising only\u003c\/p\u003e\n\u003cp\u003eWeight: approx. 492g ±5g without battery\u003c\/p\u003e\n\u003cp\u003eApprox. Takeoff Weight: approx. 736g ±5g with 1480mAh battery\u003c\/p\u003e\n\u003cp\u003eDimensions: 230 × 207 × 54mm DeadCat default\u003c\/p\u003e\n\u003cp\u003eDimensions: 207 × 199 × 54mm True X\u003c\/p\u003e\n\u003cp\u003eAdjustable Camera Angle: 10°–45°\u003c\/p\u003e\n\u003cp\u003eMaximum Speed: approx. 190km\/h\u003c\/p\u003e\n\u003cp\u003eMaximum Takeoff Altitude: approx. 7000m\u003c\/p\u003e\n\u003cp\u003eMaximum Hover Time: approx. 12–13 minutes without payload using 6S 1480mAh battery, depending on conditions\u003c\/p\u003e\n\u003cp\u003eOperating Temperature Range: -10°C to 40°C\u003c\/p\u003e\n\u003cp\u003eAntennas: Dual antennas\u003c\/p\u003e\n\u003cp\u003eGPS: Pre-installed\u003c\/p\u003e\n\u003cp\u003eGPS Module: BLITZ Mini M10 GPS V2\u003c\/p\u003e\n\u003cp\u003eGNSS Support: GPS + SBAS + Galileo + QZSS + GLONASS\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Note About Flight Time\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eManufacturer hover time is measured under controlled hover conditions and should not be understood as normal freestyle or cinematic flight time. Real flight time depends on battery, throttle use, wind, action-camera weight, propellers, temperature, and pilot style.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDJI O4 Air Unit Pro Specifications\u003c\/h3\u003e\n\u003cp\u003eImage sensor: 1\/1.3-inch\u003c\/p\u003e\n\u003cp\u003eLens field of view: 155°\u003c\/p\u003e\n\u003cp\u003eISO range: 100–25600\u003c\/p\u003e\n\u003cp\u003eLive view resolution: 1080p\/100fps H.265\u003c\/p\u003e\n\u003cp\u003eOnboard recording: 4K recording supported by DJI O4 Air Unit Pro\u003c\/p\u003e\n\u003cp\u003eVideo format: MP4\u003c\/p\u003e\n\u003cp\u003eMaximum video bitrate: 130Mbps\u003c\/p\u003e\n\u003cp\u003eColour mode: Normal \/ D-Log M\u003c\/p\u003e\n\u003cp\u003eStabilization: RockSteady 3.0+\u003c\/p\u003e\n\u003cp\u003eLive view quality: 1080p at 100fps\u003c\/p\u003e\n\u003cp\u003eOperating frequency: 5.170–5.250GHz and 5.725–5.850GHz\u003c\/p\u003e\n\u003cp\u003eCommunication bandwidth: max. 60MHz\u003c\/p\u003e\n\u003cp\u003eAntenna: Dual antennas\u003c\/p\u003e\n\u003cp\u003eBuilt-in storage: 4GB\u003c\/p\u003e\n\u003cp\u003eSupported SD cards: microSD up to 512GB\u003c\/p\u003e\n\u003cp\u003eOperating temperature: -10°C to 40°C\u003c\/p\u003e\n\u003cp\u003eAir unit weight including camera module: approx. 32g\u003c\/p\u003e\n\u003cp\u003eTransmission module dimensions: 33.5 × 33.5 × 13mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDJI O4 Compatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Goggles 3\u003c\/li\u003e\n\u003cli\u003eDJI Goggles N3\u003c\/li\u003e\n\u003cli\u003eDJI Goggles 2\u003c\/li\u003e\n\u003cli\u003eDJI Goggles Integra\u003c\/li\u003e\n\u003cli\u003eDJI FPV Remote Controller 3, when using DJI control version\u003c\/li\u003e\n\u003cli\u003eDJI FPV Remote Controller 2, when using DJI control version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther radios can be used only if they match the installed receiver version, such as ELRS or Crossfire.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eVideo Transmission Range\u003c\/h3\u003e\n\u003cp\u003eThe maximum video transmission range depends on goggles, region, environment, antenna positioning, interference, and local regulations.\u003c\/p\u003e\n\u003cp\u003eManufacturer-stated reference values may differ between FCC, CE, and SRRC regions. In Europe, CE limits apply.\u003c\/p\u003e\n\u003cp\u003eDo not treat maximum transmission range as a guaranteed flight distance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePacking List\u003c\/h3\u003e\n\u003cp\u003e1× Nazgul Evoque F5 V3 6S O4 HD BNF\u003c\/p\u003e\n\u003cp\u003e2× antennas\u003c\/p\u003e\n\u003cp\u003e1× battery pad\u003c\/p\u003e\n\u003cp\u003e2× propeller pairs\u003c\/p\u003e\n\u003cp\u003e2× battery straps\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSetup Notes\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eThe drone comes with a factory Betaflight preset installed. No firmware update, reset, or Betaflight changes are necessary before the first flight.\u003c\/li\u003e\n\u003cli\u003eBNF means the drone must still be bound to your compatible radio controller before flying.\u003c\/li\u003e\n\u003cli\u003eAngle Mode is enabled by default to make first flights safer and reduce the risk of accidents during initial setup.\u003c\/li\u003e\n\u003cli\u003eGPS Rescue is not enabled by default. It must be configured, checked, and tested by the pilot before use.\u003c\/li\u003e\n\u003cli\u003eWe strongly recommend not flashing firmware, resetting Betaflight, or applying random presets unless you have saved a backup and know exactly which target and configuration are required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notice – VTX Not Powering On\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter flashing new firmware, resetting Betaflight, or applying the wrong preset, the VTX_ON_OFF mode may be disabled or removed.\u003c\/p\u003e\n\u003cp\u003e👉 \u003cstrong\u003eHelp Center Article: \u003c\/strong\u003e\u003ca rel=\"noopener\" class=\"decorated-link cursor-pointer\" href=\"https:\/\/help.iflight-rc.eu\/en-US\/vtx-configuration-on-the-borg-stacks-4363207\"\u003eVTX Configuration on the BORG Stacks (Nazgul F5 V3)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIf this mode is not active, the DJI O4 Air Unit may not receive power and may remain off.\u003c\/p\u003e\n\u003cp\u003ePlease make sure that VTX_ON_OFF is enabled in the Betaflight Modes tab.\u003c\/p\u003e\n\u003cp\u003eIf the mode is missing, restore the factory configuration using the correct recovery preset.\u003c\/p\u003e\n\u003cp\u003eReflashing firmware is usually not required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does BNF mean?\u003cbr\u003e\u003c\/strong\u003eBNF means Bind-and-Fly. The drone is assembled and factory configured, but it must still be bound to your compatible radio controller before flying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a complete ready-to-fly set?\u003cbr\u003e\u003c\/strong\u003eNo. This is the BNF drone only. Battery, charger, goggles, radio controller, microSD card, and action camera are not included.\u003c\/p\u003e\n\u003cp\u003eIf you need a complete setup, please check our ReadyFly kits, where compatible components can be selected together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich receiver version should I choose?\u003cbr\u003e\u003c\/strong\u003eChoose the version that matches your radio controller.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse DJI for DJI FPV Remote Controller 2 or 3.\u003c\/li\u003e\n\u003cli\u003eUse ELRS 2.4GHz for iFlight Commando 8 or Commando 14 ELRS 2.4GHz.\u003c\/li\u003e\n\u003cli\u003eUse ELRS 868\/900MHz only for matching ELRS 868\/900MHz radios or modules.\u003c\/li\u003e\n\u003cli\u003eUse TBS Crossfire if you fly with Crossfire.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the drone come preconfigured?\u003cbr\u003e\u003c\/strong\u003eYes. The drone comes with a factory Betaflight preset installed. No firmware update, Betaflight reset, or configuration change is necessary before the first flight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Angle Mode enabled?\u003cbr\u003e\u003c\/strong\u003eYes. Angle Mode is enabled by default to make first flights safer and reduce the risk of accidents during initial setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs GPS Rescue enabled by default?\u003cbr\u003e\u003c\/strong\u003eNo. GPS Rescue is not enabled by default. It must be configured, checked, and tested by the pilot before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the DJI O4 Air Unit or VTX not power on?\u003cbr\u003e\u003c\/strong\u003eAfter flashing firmware, resetting Betaflight, or applying the wrong preset, the VTX_ON_OFF mode may be disabled or removed. If this mode is not active, the DJI O4 Air Unit may not receive power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a GoPro or action camera?\u003cbr\u003e\u003c\/strong\u003eYes. The frame has a front mounting position for a GoPro or similar action camera when used with a compatible mount. Additional payload increases weight and usually reduces flight time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fly in rain or wet conditions?\u003cbr\u003e\u003c\/strong\u003eNo. Do not fly in rain, snow, wet grass, fog, or high moisture conditions. Water or moisture damage is not considered a normal manufacturing defect.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSafety Disclaimer\u003c\/h3\u003e\n\u003cp\u003eFPV drones are powerful aircraft and must be operated responsibly.\u003c\/p\u003e\n\u003cp\u003eAlways follow local laws and regulations.\u003c\/p\u003e\n\u003cp\u003eRemove propellers before configuration, receiver testing, firmware work, or motor testing on the bench.\u003c\/p\u003e\n\u003cp\u003eAlways inspect the drone before each flight.\u003c\/p\u003e\n\u003cp\u003eDo not fly with damaged propellers, loose screws, damaged antennas, damaged batteries, or visible electronic damage.\u003c\/p\u003e\n\u003cp\u003eCrash damage, water damage, incorrect firmware flashing, wrong Betaflight configuration, incorrect wiring, incorrect receiver setup, wrong battery use, or unsafe operation are not considered normal manufacturing defects.\u003c\/p\u003e\n\u003cp\u003eBy purchasing and using this product, the user accepts responsibility for safe setup, safe operation, legal compliance, maintenance, and risk management.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"iFlight","offers":[{"title":"For DJI FPV Controller 2 \u0026 3 \/ GPS pre-installed","offer_id":56120479088905,"sku":"F019512","price":728.9,"currency_code":"EUR","in_stock":true},{"title":"TBS Crossfire NANO RX \/ GPS pre-installed","offer_id":56120479154441,"sku":"F019511","price":761.9,"currency_code":"EUR","in_stock":true},{"title":"ELRS 2.4GHz RX \/ GPS pre-installed","offer_id":56120479219977,"sku":"F019510","price":746.9,"currency_code":"EUR","in_stock":true},{"title":"ELRS 868\/915MHz RX \/ GPS pre-installed","offer_id":56120479252745,"sku":"F019509","price":746.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/0527\/9753\/files\/nazgul-evoque-f5-v3-o4-gps-iflight-europe-1551048.jpg?v=1781947930"},{"product_id":"nazgul-evoque-f5-v3-6s-wtfpv","title":"Nazgul Evoque F5 V3 6S WTFPV (No VTX)","description":"\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003cdiv class=\"temp-specs-td value\"\u003e\n\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003cdiv class=\"temp-specs-td value\"\u003e\n\u003ch3\u003ePlease Note\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis product does not include a camera or video transmission (VTX) system. These components must be purchased and installed separately by the user. You can find the recommended RX and GPS in the product add-ons.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDJI O4 Air Unit Pro HD system\u003c\/p\u003e\n\u003cp\u003eBLITZ Whoop 1.6W VTX\u003c\/p\u003e\n\u003cp\u003eBLITZ Mini Force 600 mW VTX\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003ch3 class=\"temp-specs-td name\"\u003eDescription\u003c\/h3\u003e\n\u003cdiv class=\"temp-specs-td value\"\u003e\n\u003cp\u003eExperience the next generation of pre-built FPV drones with iFlight's latest offering, setting a new standard in Bind-And-Fly simplicity and performance. The upgraded frame and electronics not only enhance durability but also provide enthusiasts with top-tier performance right out of the box. Welcome to the future of FPV flight with iFlight – where setup is simple, yet the thrill and capability are unmatched.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003ch3 class=\"temp-specs-td name\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"temp-specs-td value\"\u003e\n\u003cp\u003e\u003cb\u003eDC \/X Dual Geometry Flexible Switching\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe innovative switchable DC\/X-frame design offers unparalleled versatility. Whether you prefer the DC geometry for cinematic shots with no prop in view, or switch to the agile squashed X geometry for dynamic freestyle maneuvers, Nazgul Evoque F5 V3 adapts to all flight scenarios.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBorg Mini Stack Enhanced safety and stability\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eIntegrated anti-spark Filter, 65A brust current, dual independent BEC power supply, and built-in polymer capacitor further enhancing safety and stability.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUpgraded Appearance Style Meets Performance\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eInnovative Fin-Shaped Cooling Channel significantly enhances heat dissipation. Even in hot weather, it quickly disperses heat to ensure stable flight performance.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRefined Injection-Molded Construction Upgraded Quality\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUpgraded from TPU printed parts to full injection-molded components, delivering superior material integrity and refined tactile smoothness.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003ch3 class=\"temp-specs-td name\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"temp-specs-td value\"\u003e\n\u003cp\u003eProduct Name: Evoque F5 V3 WTFPV\u003c\/p\u003e\n\u003cp\u003eFC: Borg Mini F7 Flight Controller\u003c\/p\u003e\n\u003cp\u003eESC: Borg Mini 60 ESC\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eVideo Transmission and Camera: None\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eGeometry: DeadCat (default) \/ True X (switchable)\u003c\/p\u003e\n\u003cp\u003eFrame diagonal motor distance: 236mm (DC-Default) \/ 239mm (True X)\u003c\/p\u003e\n\u003cp\u003eMotor: XING2 2207 1750KV motors\u003c\/p\u003e\n\u003cp\u003eProp: Nazgul F5 propellers\u003c\/p\u003e\n\u003cp\u003eWeight: 460±5g\u003c\/p\u003e\n\u003cp\u003eTakeoff Weight: Approx. 704±5g (With 1480mAh Battery)\u003c\/p\u003e\n\u003cp\u003eDimensions (L×W×H): 230*207*54mm(DC-Default)\/207*199*54mm(True X)\u003c\/p\u003e\n\u003cp\u003eAdjustable angle of the camera: 10-45°\u003c\/p\u003e\n\u003cp\u003eMax Speed: 190 km\/h\u003c\/p\u003e\n\u003cp\u003eMaximum Takeoff Altitude: 7000 m\u003c\/p\u003e\n\u003cp\u003eMax Hover Time: Approx. 12-13 min (No load With 6S 1480mAh)\u003c\/p\u003e\n\u003cp\u003eOperating Temperature Range: -10° to 40° C (14° to 104° F)\u003c\/p\u003e\n\u003cp\u003eAntennas: Dual Antennas\u003c\/p\u003e\n\u003cp\u003eGNSS： GPS+SBAS+Galileo+QZSS+Glonass (Optional)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\"\u003e\n\u003ch3 class=\"temp-specs-td name\"\u003ePacking List\u003c\/h3\u003e\n\u003cdiv class=\"temp-specs-td value\"\u003e\n\u003cp\u003e1 x Evoque F5 V3 6S WTFPV\u003c\/p\u003e\n\u003cp\u003e2 x Antennas\u003c\/p\u003e\n\u003cp\u003e1 x Battery pad\u003c\/p\u003e\n\u003cp\u003e2 x propeller(Pairs)\u003c\/p\u003e\n\u003cp\u003e2 x Battery strap\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"169\" data-end=\"232\"\u003e\u003cstrong data-start=\"169\" data-end=\"232\"\u003eImportant Notice – VTX not powering on\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"234\" data-end=\"400\"\u003eAfter flashing new firmware, the VTX_ON_OFF mode may be disabled or removed.\u003cbr data-start=\"314\" data-end=\"317\"\u003eIf this mode is not active, the VTX will not receive power and will remain off.\u003c\/p\u003e\n\u003cp data-start=\"402\" data-end=\"567\"\u003ePlease make sure that VTX_ON_OFF is enabled in the Betaflight “Modes” tab.\u003cbr data-start=\"480\" data-end=\"483\"\u003eIf the mode is missing, restore the factory configuration using our recovery preset.\u003c\/p\u003e\n\u003cp data-start=\"569\" data-end=\"672\"\u003e👉 \u003cstrong data-start=\"572\" data-end=\"596\"\u003eHelp Center Article: \u003c\/strong\u003e\u003ca href=\"https:\/\/help.iflight-rc.eu\/en-US\/vtx-configuration-on-the-borg-stacks-4363207\" data-start=\"599\" data-end=\"672\" class=\"decorated-link cursor-pointer\" rel=\"noopener\"\u003eVTX Configuration on the BORG Stacks (Nazgul F5 V3)\u003cspan aria-hidden=\"true\" class=\"ms-0.5 inline-block align-middle leading-none\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"20\" height=\"20\" aria-hidden=\"true\" data-rtl-flip=\"\" class=\"block h-[0.75em] w-[0.75em] stroke-current stroke-[0.75]\"\u003e\u003cuse href=\"\/cdn\/assets\/sprites-core-mr1omm3f.svg#304883\" fill=\"currentColor\"\u003e\u003c\/use\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-start=\"674\" data-end=\"791\"\u003eThis will guide you step by step to restore the correct VTX configuration.\u003cbr data-start=\"748\" data-end=\"751\"\u003eReflashing firmware is not required.\u003c\/p\u003e\n\u003cp data-start=\"674\" data-end=\"791\"\u003e \u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis product does not include a camera or video transmission (VTX) system. These components must be purchased and installed separately by the user. You can find the recommended RX and GPS in the product add-ons.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"iFlight","offers":[{"title":"No Receiver \/ No GPS","offer_id":56163001303305,"sku":"F019657","price":394.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/0527\/9753\/files\/nazgul-evoque-f5-v3-6s-wtfpv-no-vtx-iflight-europe-7341492.png?v=1769120603"},{"product_id":"nazgul-evoque-f7-o4-gps","title":"Nazgul Evoque F7 O4 GPS","description":"\u003cdiv class=\"new_overview-item\"\u003e\n\u003cdiv class=\"new_overview-desc\"\u003e\n\u003cp\u003eIntroducing the new 7-inch Nazgul Evoque—packed with 6 key upgrades for immersive long-range flights. It inherits the series' DC geometry, delivering cinematic shots free of prop obstruction. Equipped with the DJI O4 Pro Air Unit, it supports seamless video capture and output, letting you capture unobstructed mountain and sea views effortlessly. Enjoy extended flight time to fly and create without limits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"new_overview-item\"\u003e\n\u003ch3 class=\"new_overview-title\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 class=\"new_overview-title\"\u003eHighlights\u003c\/h3\u003e\n\u003cdiv class=\"new_overview-desc\"\u003e\n\u003cp\u003e\u003cstrong\u003eDualband Dual-Antenna, Enhanced Long-Range Stability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith an optional ELRS dualband dual-antenna receiver, supporting simultaneous 2.4GHz + 900MHz communication. Paired with a dual-antenna, fan-shaped distributed layout for omnidirectional signal reception, it ensures stable, controlled long-range flights even in complex environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpgraded Borg Stack\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe upgraded Borg Stack features a built-in anti-spark filter, dual independent BEC power supply (12V 2A with VTX switch + 5V 25A) for stable power, and a built-in polymer capacitor to extend device lifespan.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFin-Shaped Cooling Channel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fin-shaped cooling channel design enhances heat dissipation and ensures stable long-range flight performance. It comes with Dynamic LED effects full of recognition and technological sense.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlagship Recording Capability Equipped with DJI O4 Air Unit Pro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUpgraded with a 1\/1.3-inch image sensor, delivers remarkable performance in low-light and night environments. Capture low-altitude, high-speed flight footage in 4K resolution with an ultra-wide 155° FOV. Experience the immersive visual impact of flight like never before, with crisp 4K output that effortlessly meets your creative needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"new_overview-item\"\u003e\n\u003ch3 class=\"new_overview-title\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 class=\"new_overview-title\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"new_overview-desc\"\u003e\n\u003cp\u003eProduct Name: Nazgul Evoque F7 O4 6S HD\u003c\/p\u003e\n\u003cp\u003eGeometry: Deadcat(DC)\u003c\/p\u003e\n\u003cp\u003eFC: Borg Mini F7 Flight Controller\u003c\/p\u003e\n\u003cp\u003eESC: Borg 60R ESC\u003c\/p\u003e\n\u003cp\u003eVideo Transmission: DJI O4 Air Unit Pro\u003c\/p\u003e\n\u003cp\u003eFrame: 321mm wheelbase\u003c\/p\u003e\n\u003cp\u003eMotor: XING2 2809 1250KV motors\u003c\/p\u003e\n\u003cp\u003eProp: HQ 7.5X3X3 propellers\u003c\/p\u003e\n\u003cp\u003eWeight: 765±5g(Without Battery)\u003c\/p\u003e\n\u003cp\u003eTakeoff Weight: Approx. 1620±5g (incl. 21700 6S 10000mAh)\u003c\/p\u003e\n\u003cp\u003eDimensions (L×W×H): 284*283*53mm\u003c\/p\u003e\n\u003cp\u003eMax Speed: 140km\/h\u003c\/p\u003e\n\u003cp\u003eMaximum Takeoff Altitude: 7000 m\u003c\/p\u003e\n\u003cp\u003eMax Hover Time: Approx. 25min with 6S 8000-10000mAh battery No Load\u003c\/p\u003e\n\u003cp\u003eRecommended load: 800g\u003c\/p\u003e\n\u003cp\u003eOperating Temperature Range: -20° to 40° C\u003c\/p\u003e\n\u003cp\u003eAntennas: Dual Antennas\u003c\/p\u003e\n\u003cp\u003eGNSS: GPS+SBAS+Galileo+QZSS+Glonass\u003c\/p\u003e\n\u003cp\u003eBattery plug: XT60\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"new_overview-item\"\u003e\n\u003ch3 class=\"new_overview-title\"\u003eVideo Transmission\u003c\/h3\u003e\n\u003cdiv class=\"new_overview-desc\"\u003e\n\u003cp\u003eProduct Name: DJI O4 Air Unit Pro \u003c\/p\u003e\n\u003cp\u003eImage Sensor: 1\/1.3-inch\u003c\/p\u003e\n\u003cp\u003eLens: FOV: 155°\u003c\/p\u003e\n\u003cp\u003eISO: 100-25600\u003c\/p\u003e\n\u003cp\u003eVideo Resolution: 1080p\/100fps H.265\u003c\/p\u003e\n\u003cp\u003eVideo Format: MP4, Max Video Bitrate: 130Mbps\u003c\/p\u003e\n\u003cp\u003eColor Mode: Normal Mode\/D-Log M\u003c\/p\u003e\n\u003cp\u003eStabilization: RockSteady 3.0+ ; Stabilization function off (When RockSteady is enabled, the shooting angle only supports standard.)\u003c\/p\u003e\n\u003cp\u003eLive View Quality: 1080P@100fps\u003c\/p\u003e\n\u003cp\u003eOperating Frequency: 5.170-5.250 GHz  \u0026amp; 5.725-5.850 GHz\u003c\/p\u003e\n\u003cp\u003eTransmitter Power (EIRP): 5.1GHz＜23dBm(CE)\/5.8GHz＜33dBm(FCC)\/＜14dBm(CE)\/＜30dBm(SRRC))\u003c\/p\u003e\n\u003cp\u003eMax Video Transmission Range: With DJI Goggles 3\/DJI Goggles N3: 15 km (FCC), 8 km (CE), 8 km (SRRC)\u003c\/p\u003e\n\u003cp\u003eCommunication Bandwidth: Max 60 MHz\u003c\/p\u003e\n\u003cp\u003eAntenna: Dual antennas\u003c\/p\u003e\n\u003cp\u003eBuilt-in Storage: 4GB\u003c\/p\u003e\n\u003cp\u003eSupported SD cards: microSD (up to 512GB)\u003c\/p\u003e\n\u003cp\u003eOperating Temperature: -10° to 40° C\u003c\/p\u003e\n\u003cp\u003eWeight: Air Unit (camera module included): Approx. 32 g\u003c\/p\u003e\n\u003cp\u003eDimensions: Transmission Module: 33.5×33.5×13 mm (L×W×H)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"new_overview-item\"\u003e\n\u003cdiv class=\"new_overview-title\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3 class=\"new_overview-title\"\u003ePacking List\u003c\/h3\u003e\n\u003cdiv class=\"new_overview-desc\"\u003e\n\u003cp\u003e1 x Nazgul Evoque F7 O4 6S HD\u003c\/p\u003e\n\u003cp\u003e1 x Battery pad\u003c\/p\u003e\n\u003cp\u003e2 x 7.5 inch Props (Pairs)\u003c\/p\u003e\n\u003cp\u003e2 x battery straps\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"iFlight","offers":[{"title":"For DJI FPV Controller 2 \u0026 3 \/ GPS pre-installed","offer_id":56829340156169,"sku":"L020267","price":764.9,"currency_code":"EUR","in_stock":true},{"title":"TBS Crossfire Diversity NANO RX \/ GPS pre-installed","offer_id":56829340188937,"sku":"L020266","price":821.9,"currency_code":"EUR","in_stock":true},{"title":"iFlight ELRS 2.4GHz\/868\/900MHz Dualband Diversity RX \/ GPS pre-installed","offer_id":56829340221705,"sku":"L020265","price":802.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/0527\/9753\/files\/nazgul-evoque-f7-o4-gps-preorder-5980284.png?v=1762004739"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/0527\/9753\/collections\/nazgul-series-fpv-drones-1299361.png?v=1781026033","url":"https:\/\/iflight-rc.eu\/en-si\/collections\/nazgul-bnfs.oembed","provider":"iFlight Europe","version":"1.0","type":"link"}