{"product_id":"dogcom-6s-5200mah-120c-battery","title":"DOGCOM 6S 5200mAh 120C Battery","description":"\u003cp\u003eThe DOGCOM 5200mAh 6S 120C LiPo Battery is a high-discharge 6S pack for larger FPV drones, cinelifters, cinematic platforms and professional UAV builds that need strong, stable power delivery.\u003c\/p\u003e\n\u003cp\u003eWith 5200mAh capacity, 22.2V nominal voltage, 115.44Wh of energy and a manufacturer-rated 120C continuous discharge, it is built for demanding setups where consistent throttle response and low voltage sag matter. At approx. 750g, it balances energy reserve against take-off weight.\u003c\/p\u003e\n\u003cp\u003eBefore use, check that your frame, motors, ESC, connector, wiring, propellers, payload and total take-off weight are suitable for a 6S 5200mAh battery of this size.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5200mAh \/ 115.44Wh energy for larger 6S aircraft\u003c\/li\u003e\n\u003cli\u003eManufacturer-rated 120C continuous and 240C burst discharge\u003c\/li\u003e\n\u003cli\u003eStrong throttle response and stable power output under load\u003c\/li\u003e\n\u003cli\u003eLow internal resistance design for efficient current delivery\u003c\/li\u003e\n\u003cli\u003eApprox. 750g, a good balance of capacity and weight\u003c\/li\u003e\n\u003cli\u003eDesigned for larger FPV drones, cinelifters, cinematic platforms and professional UAV setups\u003c\/li\u003e\n\u003cli\u003eXT60 or XT90 discharge connector, depending on selected version\u003c\/li\u003e\n\u003cli\u003eJST-XHR balance connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003eBrand: DOGCOM\u003cbr\u003eBattery type: LiPo (lithium polymer)\u003cbr\u003eCapacity: 5200mAh \/ 5.2Ah\u003cbr\u003eConfiguration: 6S1P (6 cells)\u003cbr\u003eNominal voltage: 22.2V (3.7V per cell)\u003cbr\u003eMaximum charge voltage: 4.20V per cell \/ 25.2V per pack\u003cbr\u003eEnergy: 115.44Wh\u003cbr\u003eContinuous discharge: 120C (manufacturer rating)\u003cbr\u003eBurst discharge: 240C (manufacturer rating)\u003cbr\u003eDischarge connector: XT60 or XT90, depending on selected version\u003cbr\u003eBalance connector: JST-XHR\u003cbr\u003eDimensions: 158 × 48 × 47mm (L × W × T)\u003cbr\u003eWeight: approx. 750g\u003cbr\u003eRecommended storage voltage: 3.80–3.85V per cell\u003cbr\u003eRecommended landing voltage: approx. 3.5–3.7V per cell (resting)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote on current ratings:\u003c\/strong\u003e C-ratings are manufacturer ratings. Real usable current is limited by battery temperature, voltage sag, connector type, wire gauge, solder joints, ESC, motors, airflow, aircraft setup and flight duration. For high-current setups, the XT90 version offers more current headroom than XT60.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eChoosing the Right Pack Size\u003c\/h3\u003e\n\u003cp\u003eUse this battery only on aircraft designed for its size and weight. A pack of this size is generally not suitable for small or lightweight FPV drones, where the extra weight would reduce performance, efficiency and handling.\u003c\/p\u003e\n\u003cp\u003eIf your aircraft needs more energy reserve and can carry approx. 125g more, the \u003ca href=\"https:\/\/iflight-rc.eu\/en\/products\/dogcom-6s-6000mah-120c-battery\" title=\"DOGCOM 6S 6000mAh 120C Battery\"\u003eDOGCOM 6S 6000mAh 120C Battery\u003c\/a\u003e is the larger option.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eVoltage Warnings and Landing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSet Betaflight \/ OSD voltage warnings with a safety margin. Many pilots use around 3.5V per cell under load.\u003c\/li\u003e\n\u003cli\u003eLand at approx. 3.5–3.7V per cell resting voltage, depending on aircraft load, payload, flying style and safety margin.\u003c\/li\u003e\n\u003cli\u003eVoltage under load is lower than resting voltage after landing.\u003c\/li\u003e\n\u003cli\u003eMonitor voltage per cell and consumed mAh together, and leave enough reserve for a safe landing.\u003c\/li\u003e\n\u003cli\u003eAvoid repeatedly discharging below 3.5V per cell resting voltage. Deep discharge can permanently damage LiPo cells and cause swelling, imbalance or reduced performance.\u003c\/li\u003e\n\u003cli\u003eIf voltage sag is excessive or the battery comes back unusually hot, reduce the load and check whether the battery suits your aircraft, propellers, ESC, wiring and flying style.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCharging Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways use a LiPo-compatible balance charger in LiPo balance charge mode.\u003c\/li\u003e\n\u003cli\u003eMaximum charge voltage: 4.20V per cell \/ 25.2V for 6S. Never charge above this.\u003c\/li\u003e\n\u003cli\u003eRecommended charge rate for longer battery life: 1C or lower (5.2A for this pack).\u003c\/li\u003e\n\u003cli\u003eOnly charge above 1C if the battery label or manufacturer explicitly allows it and your charger, power supply, cables and safety setup are suitable.\u003c\/li\u003e\n\u003cli\u003eNever charge unattended or near flammable materials.\u003c\/li\u003e\n\u003cli\u003eDo not charge a damaged, swollen, crashed, over-discharged, shorted or wet battery, or a battery that is very cold or very hot.\u003c\/li\u003e\n\u003cli\u003eStop charging immediately if the battery becomes hot, swells, smells unusual, shows imbalance or behaves abnormally.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eStorage Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStore at 3.80–3.85V per cell. After flying, bring the battery back to storage voltage if it will not be used again soon.\u003c\/li\u003e\n\u003cli\u003eDo not store fully charged or deeply discharged for long periods.\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery from the aircraft, charger or any other device after use.\u003c\/li\u003e\n\u003cli\u003eStore in a cool, dry place, ideally between 15°C and 25°C, away from heat, direct sunlight, frost, moisture and physical damage.\u003c\/li\u003e\n\u003cli\u003eUse a fire-resistant LiPo bag or a suitable fire-resistant container.\u003c\/li\u003e\n\u003cli\u003eCheck the battery periodically. If you notice swelling, leakage, unusual smell, corrosion, damage or abnormal cell imbalance, stop using it and dispose of it according to local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× DOGCOM 5200mAh 6S 120C LiPo Battery with XT60 or XT90 connector, depending on selected version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSafety Disclaimer\u003c\/h3\u003e\n\u003cp\u003eLithium polymer batteries must be handled with care. Improper charging, over-charging, over-discharging, short-circuiting, overheating, physical damage, puncturing, disassembling or incorrect use can cause fire, explosion, injury or property damage.\u003c\/p\u003e\n\u003cp\u003eAlways follow the charger instructions, the battery label and the product specifications. Select a battery that suits your aircraft, and operate, charge, store and transport it within safe voltage, current and temperature limits.\u003c\/p\u003e\n\u003cp\u003eDo not use this battery if it has been crashed, punctured, swollen, overheated, over-discharged, shorted, exposed to water or otherwise damaged.\u003c\/p\u003e","brand":"DOGCOM","offers":[{"title":"XT60 Connector","offer_id":57349309661449,"sku":"DC5A4328","price":117.77,"currency_code":"EUR","in_stock":true},{"title":"XT90 Connector","offer_id":56312717443337,"sku":"DC5A2382","price":117.77,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/0527\/9753\/files\/DSC03091.jpg?v=1792748102","url":"https:\/\/iflight-rc.eu\/en-pt\/products\/dogcom-6s-5200mah-120c-battery","provider":"iFlight Europe","version":"1.0","type":"link"}