Smooth and Powerful XING2 Motors

The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection.

Latest Nazgul Frame for Maximum Protection

The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.

DJI O4 Pro Air Unit Low-Latency digital transmission

Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)

4K Stabilized Video with 155° Ultra-Wide Angle

Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)

Secured Battery Plug with Anti-Spark Filter

Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.

Specifications:

Product Name: Evoque F5 V2

FC: BLITZ Mini F722 Flight Controller

ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC

Video Transmission: DJI O4 Pro Air Unit

Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat)

Motor: XING2 2207 motors

Prop: Nazgul 5 inch propellers

Weight: 433g/436g

Takeoff Weight: Approx. 693 g/695g (With 1400mAh Battery)

Dimensions (L×W×H): 172×145×36±2mm (Squashed X) / 190×136×36±2mm (DeadCat)

Diagonal Distance: 225 mm

Max Speed: 190 Km/h (Manual Mode)

Maximum Takeoff Altitude: 5000 m

Max Hover Time: Approx. 8 mins

Max Flight Distance: 5 km

Max Wind Speed Resistance: Level 7

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Antennas: Dual Antennas

GNSS： GPS+SBAS+Galileo+QZSS+Glonass (Optional)

Video Transmission:

Product Name: DJI O4 Pro Air Unit

Image Sensor: 1/1.3-inch

Lens: FOV: 155°

ISO: 100-25600

Video Resolution: Max 4K@120fps

Video Format: MP4, Max Video Bitrate: 130Mbps

Color Mode: Standard/D-Log M

Stabilization: Super Stabilization 3.0+ (RockSteady 3.0+)/ Stabilization Function Off (Supports Gyroflow)

Live View Quality: 1080P@100fps

Operating Frequency: 5.170-5.250 GHz  & 5.725-5.850 GHz

Transmitter Power (EIRP): 5.1GHz＜23dBm(CE)/5.8GHz＜33dBm(FCC)/＜14dBm(CE)/＜30dBm(SRRC))

Communication Bandwidth: Max 60 MHz

Antenna: Dual antennas

Internal Memory: 4GB

Supported SD cards: microSD cards (max. 512GB)

Packing List:

1 x Evoque F5 6S HD BNF

2 x Antennas

1 x Battery pad

2 x propeller(Pairs)

2 x Battery strap

Compatibility:

DJI Goggles 3 / DJI Goggles N3+ DJI FPV Remote Controller 3 

DJI Goggles 2 / DJI Goggles Integra+ DJI FPV remote Controller 2

(Or another Radio to match the RX in the Drone)

The flight control firmware needs to be configured to support the SBUS protocol so that the DJI FPV remote controller can be used.

Notice:

All iFlight BNFs are tested before shipment to guarantee highest quality. 

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.