15-inch Professional FPV Drone Platform

The X415 ECO Analog is a large 15-inch FPV drone platform developed for professional, industrial, commercial, and public-sector users who need a powerful and adaptable aircraft for technical FPV applications.

With its 8S propulsion system, 637mm X-frame, XING-E 5215 500KV motors, 1573 propellers, and BLITZ H7 Pro / BLITZ E80 Pro electronics stack, the X415 ECO Analog is built for stable handling, strong lift performance, and flexible payload integration.

Typical applications include infrastructure inspection support, industrial site documentation, environmental monitoring, research, training, and custom sensor integration.

Highlights

15-inch Professional Platform

The large 637mm X-shaped frame provides stable handling, strong lift capability, and predictable flight behaviour for professional FPV use.

Powerful 8S System

The combination of XING-E 5215 500KV motors, 1573 propellers, and an 8S battery setup delivers the thrust reserves needed for a large-format drone and demanding flight profiles.

BLITZ H7 Pro + BLITZ E80 Pro Stack

The BLITZ H7 Pro flight controller and BLITZ E80 4-IN-1 Pro ESC provide a robust electronics foundation for professional FPV operation and serviceability.

High-Power Analog Video Transmission

The integrated BLITZ Whoop 5.8G 2.5W VTX supports PIT, 25mW, 400mW, 1000mW, and 2500mW output modes.
VTX power, channel selection, and frequency use must always comply with local regulations.

Pre-Installed GPS/GNSS

The X415 ECO Analog comes with GPS/GNSS pre-installed. Supported satellite systems include GPS, SBAS, Galileo, QZSS, and GLONASS.

GPS can support positioning, telemetry, and rescue-related functions when correctly configured and tested. These functions should not replace proper failsafe setup, pilot training, and safe operating procedures.

Flight Performance

Reference values with 8S 5600mAh LiPo battery:

Maximum Hover Time

• No load: approx. 18 min
• 4kg payload: approx. 7 min
• 6kg payload: approx. 5 min

Maximum Cruise Time

• No load: approx. 14 min
• 4kg payload: approx. 5 min
• 6kg payload: approx. 3.5 min

Actual flight time depends on payload, battery condition, wind, temperature, altitude, propeller condition, and flight style.

Required to Fly

Depending on the final package version, you may still need:

• Compatible radio controller
  
• Analog FPV goggles or analog ground station
• 8S LiPo battery
• 8S-compatible charger
  
• Payload-specific mounting hardware

Battery Recommendation

The reference setup is based on an 8S 5600mAh LiPo battery.

For professional payload use, battery selection should be checked according to total takeoff weight, current draw, flight time target, payload position, and operating conditions.

Payload flights should always be tested step by step, starting with short hover and handling checks.

Technical Specifications

Product Name: X4 15-inch FPV Drone
Model: X415 ECO Analog 5.8G 2.5W 8S
Product Type: 15-inch professional FPV drone platform
Frame Layout: X-shaped
Wheelbase: 637mm
Flight Controller: BLITZ H7 Pro
ESC: BLITZ E80 4-IN-1 Pro
VTX: BLITZ Whoop 5.8G 2.5W VTX
Motors: XING-E 5215 500KV
Propellers: 1573
Battery System: 8S
Reference Battery: 8S 5600mAh LiPo
Antenna Quantity: Single antenna
GNSS: Pre-installed and pre-configured
GNSS Support: GPS + SBAS + Galileo + QZSS + GLONASS

Weight and Dimensions

Net Weight: 2228g ±5g
Including propellers, nuts, antennas, and anti-slip pads. Prototype weight; mass-production weight may be updated later.

Takeoff Weight: 3283g ±5g
With 8S 5600mAh LiPo battery. Prototype weight; mass-production weight may be updated later.

Overall Size: 544 × 544 × 65.5mm

Performance Data

Maximum Horizontal Speed: 140km/h
Maximum Takeoff Altitude: 6000m
Maximum Wind Resistance: Level 8
Operating Temperature: -10°C to 40°C

Analog VTX Specifications

VTX Model: BLITZ Whoop 5.8G 2.5W VTX
Frequency: 5.8GHz analog
Power Modes: PIT / 25mW / 400mW / 1000mW / 2500mW
Input Voltage: 7–34V
Channels: 40CH, A / B / E / F / R bands
Antenna Connector: MMCX
Mounting: 25.5 × 25.5mm, Φ1.6mm
Weight: 32g
Dimensions: 50 × 30 × 16mm
Current at 12V:
   PIT: ≤140mA
   25mW: ≤200mA
   400mW: ≤340mA
   1000mW: ≤480mA
   2500mW: ≤780mA

Packing List

1× X415 ECO 8S GPS ANALOG

Setup Notes

The X415 ECO Analog is a large and powerful professional FPV platform. It should only be set up and operated by experienced users.

Before first flight:

• Remove propellers before configuration
• Check receiver and failsafe setup
• Confirm motor direction and propeller installation
• Check VTX channel, power level, and antenna installation
• Verify battery voltage and connector condition
• Check center of gravity with battery and payload
• Start with short low-altitude test flights

FAQ

Is this a complete Ready-to-Fly kit?

No. This product includes 1× drone only. Battery, charger, goggles, radio controller, receiver/control link, payload equipment, and field accessories are not included.

Which battery should I use?

The reference data is based on an 8S 5600mAh LiPo.

Does it include GPS?

Yes. This model comes with GNSS pre-installed and pre-configured. It supports GPS, SBAS, Galileo, QZSS, and GLONASS.

Can it carry payloads?

Yes, reference flight-time data is provided for 4kg and 6kg payloads. Actual performance depends on payload shape, mounting, battery, weather, and flight style.

Safety Disclaimer

This is a powerful professional FPV aircraft and must be operated responsibly.

Always follow local laws, radio regulations, and internal operating procedures. Remove propellers before setup or bench testing. Do not fly with damaged propellers, loose screws, damaged antennas, damaged batteries, or visible electronic damage.

Payloads must be mounted securely and tested carefully. Incorrect setup, unsafe payload mounting, wrong battery use, water damage, crash damage, incorrect firmware changes, or operation outside legal limits are not considered normal manufacturing defects.