About
The GM52 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras.
This motor is designed for large-scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque.
The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
Specifications
Model: GM5208-24
Motor Out Diameter: Ф59.5±0.05mm
Configuration: 24N/22P
Motor Height: 31.2±0.2mm
Hollow Shaft(OD): Ф15-0.008/-0.012 mm
Hollow Shaft(ID): Ф12.6+0.05/0 mm
Wire Length: 610±3mm
Cable AWG: #24
Motor Weight: 204±0.5g
Wire plug: 2.5mm dupont connector
No-load current: 0.09±0.1 A
No-load volts: 20V
No-load Rpm: 396~436 RPM
Load current: 1A
Load volts: 20V
Load torque(g·cm): 1800-2500
Motor internal resistance: 13.7Ω±5%(Resistance varies with temperature)
High voltage test: DC500V 10mA @1sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): clockwise
High-low temperature test:
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤40W
Working Voltage: 3-5S
Working temperature: -20~60℃;10~90%RH
Packing List
1 x GM5208-24 gimbal motor
1 x Screw bag
The GM52 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras.
This motor is designed for large-scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque.
The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
Specifications
Model: GM5208-24
Motor Out Diameter: Ф59.5±0.05mm
Configuration: 24N/22P
Motor Height: 31.2±0.2mm
Hollow Shaft(OD): Ф15-0.008/-0.012 mm
Hollow Shaft(ID): Ф12.6+0.05/0 mm
Wire Length: 610±3mm
Cable AWG: #24
Motor Weight: 204±0.5g
Wire plug: 2.5mm dupont connector
No-load current: 0.09±0.1 A
No-load volts: 20V
No-load Rpm: 396~436 RPM
Load current: 1A
Load volts: 20V
Load torque(g·cm): 1800-2500
Motor internal resistance: 13.7Ω±5%(Resistance varies with temperature)
High voltage test: DC500V 10mA @1sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): clockwise
High-low temperature test:
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤40W
Working Voltage: 3-5S
Working temperature: -20~60℃;10~90%RH
Packing List
1 x GM5208-24 gimbal motor
1 x Screw bag
iPower GM5208-24 Gimbal Motor
- Regular price
- £36.00
- Sale price
- £36.00
- Regular price
-