Skip to product information
1 of 9

iFlight RC Europe

Taurus X8 Pro 8S HD Cinelifter

Taurus X8 Pro 8S HD Cinelifter

Regular price CHF 2,538.00
Regular price Sale price CHF 2,538.00
Sale Sold out
excl. Taxes.
Lead time
Receiver option

Ships from the official iFlight RC Warehouse in Austria

No additional import fees for EU member states; English & German Support; 30 day Warranty*; Local Repair Service.

Let's introduce our new iFlight Taurus X8 Pro HD BNF, our heavy-duty gear to lift those big cams!

No reviews
View full details

Additional Suggested Parts

Product Information


Let's introduce our new iFlight Taurus X8 Pro BNF!

☑ Big size XING2 3110 // The power motors with extreme lift and flight performance
☑ 8S power system // More power and speed
☑ 8x single X-Class grade ESC motor drivers for more reliability
☑ Redundant iFlight ESC Commander PCB // Power distribution board with high capacitance, filtering and heat dissipation
☑ GPS module pre-installed (BF GPS rescue or INAV GPS RTH feature available)
☑ Universal camera mount and accessories for a wide range of cameras to install

Engineered with professionals for professionals, a BNF that's aimed for carrying big payloads offering a soft-damped universal platform for DSLR or cinema cameras (Red Komodo, Zcam, BMPCC, etc) featuring DJI's FPV HD transmission system. 8-single X-Class grade ESCs for maximum reliability and power. Redundancy is a big safety factor when carrying expensive cinema gear. Even in case of an overload or failure, the remaining ESCs and motors will be able to carry your gear back to you. In case you get troubles with signal interference or radio signal loss the GPS rescue feature will automatically take over control, climb to max flight altitude, fly back in a straight line, and descend towards your liftoff location until the signal transmission is regained (no automated landing). The integrated TPU landing gear provides sufficient height for most terrain and offers some protection on harder landings.

2kg maximum payload for a variety of top-mounted cameras and the ability to fine-adjust the stable mount for a perfectly balanced CG (Center of Gravity). The top mount 8S battery acts as a power source as well as a counterweight for most common cinema camera weights which can be easily exchanged with our iFlight battery quick-release mounting system. The adjustable CNC aluminum camera mount offers angles from 5 to 35 degrees and can be safely secured for reproducible outcomes. No jello, no jitter, no problem; Our silicon-ball dampened carbon camera base is decoupled from the rest of the frame to reduce the amount of vibration generated by motors and propellers. For the perfect cinematic shot, we recommend additional software stabilization in the post (Reelsteady, Gyroflow, etc.) or a hardware module (for example SteadXP).


FC // BLITZ F7 Pro Flight Controller
Mount pattern: 35*35mm / 4mm PCB hole diameter
Smart audio / IRC Tramp VTX protocol supported
Firmware target: IFLIGHT_BLITZ_F7_PRO
BlackBox: 512MB Onboard
Dimensions: 41*41.5mm
BEC: 5V/2.5A, 12V/2A
Barometer: DPS310
OSD Chip: AT7456E
LED controller: Yes
MCU: STM32 F722
Weight: 17g (±2)
Beeper pad: Yes
Gyro: MPU6000

ESC // 2 x iFlight ESC Commander PCB (8x BLITZ E80 Single ESC)
Supports up to Dshot600, Proshot, Oneshot, Multishot
Firmware Target: IFLIGHT_BLITZ_G2
Up to 48kHz PWM frequency
Mounting pattern: 40*17mm
Constant: 80A / Burst: 100A
BlHeli32 telemetry: Yes
Current Sensor: Yes
Input: 2-8S LIPO
MCU: G071

GPS module: iFlight M8Q-5883-GPS & Compass V2.0 (LINK)
Total Dimensions: 428mm*249mm (body dimension)
Upper(middle) plate thickness: 3.5mm
Weight: 2.3kg±5g (without battery)
Bottom plate thickness: 3.5mm
BLITZ F7 Pro Flight Controller
Motor: XING2 3110 900KV
Top plate thickness: 3mm
Arm Thickness: 8mm
Propeller size: 8 inch
Wheelbase: 450mm

Flight time with 5.000mAh 8S:
- No camera installed: 12min
- Installed camera: 6-8min

Maximum speed:
- Low payload: 160km/h
- High payload: 130km/h

- Maximum payload: 2kg
- Recommended payload: 1-1.5kg

Video Transmission

Product Name: DJI O3 Air Unit
Weight: Approx. 290 grams(headband included)
Dimensions (L×W×H): L167 * W1039 * H 813mm
Screen Size (single screen): 0.49-inch
Resolution (single screen): 1920×1080
Refresh Rate: Up to 100 Hz
Interpupillary Distance Range: 56-72 mm
Diopter Adjustment Range: -8.0 D to +2.0 D
FOV (single screen): 51°
Communication Frequency: 2.400-2.4835 GHz;5.725-5.850 GHz
Transmission Power (EIRP):
2.4 GHz: < 30 dBm (FCC), < 20 dBm (CE/SRRC/KC)
5.8 GHz [4]: < 30 dBm (FCC), < 23 dBm (SRRC), < 14 dBm (CE/KC)
Max Video Transmission Bitrate : 50 Mbps
Operating Temperature Range: 0° to 40° C (32° to 104° F)

Packing List

1x Taurus X8 PPro
8 x HQ 8X4X3 CW propeller + 8 x HQ 8X4X3 CW propeller (Color may vary)
2 x Albatross LHCP 5.8GHz SMA FPV Antenna
1 x XT90 Male to XT60 Female Adapter Wire
2 x iFlight Lipo Strap 20*400mm (Black)
2 x iFlight Lipo Strap 20*500mm (Black)
1 x Pre-built and Tested Taurus X8 Pro
1 x DJI FPV Air Unit Module + Camera
1 x CNC Aluminum alloy cam mount
1 x XT90 Smart Smoke Stopper
1 x Prop Wrench


All iFlight BNFs are tested before shipment to guarantee highest quality.

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at